EN
Thank you for choosing this product. We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Environmental conditions This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used).
l This appliance is intended to be used in household and similar applications such as: - Staff kitchen areas in shops, offices and other working environments; - Farm houses; - By clients in hotels, motels and other residential type environments; - Bed and breakfast type environments. A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications.
Electrical connections safety instructions l Do not expose the washing machine to rain, direct sunlight or other weather elements. Protect from possible freezing. and l The technical details (supply voltage and power input) are indicated on the product rating l When moving, do not lift the washing machine by the knobs plate or detergent drawer; during l Make sure that the electrical transport, never rest the door on system is earthed, complies the trolley.
l Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1. l If the washing machine is built-in, unscrew the 3 or 4 transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer tubes (B).
Hydraulic connections 3 l Connect the water hose to the water supply tap (fig. 3) only using the hose supplied with the appliance (do not reuse old hose-sets). l SOME MODELS may include one or more of the following features: 4 l HOT&COLD (fig. 4): water mains connection settings with hot and cold water for higher energy savings. Connect the grey tube to the cold water tap and the red one to the hot water tap.
Setting 7 EN l The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support. If an under sink connection is used the drain hose must be routed above the sink overfill opening to prevent back siphoning. Care must be taken to avoid kinking or trapping the drain hose (fig. 7).
3. DETERGENT DRAWER The detergent draw is split into compartments as illustrated in figure 9: 3 9 l compartment "1": for prewash detergent; l compartment “ ”: for special additives, 1 softeners, starch fragrances, etc.; 2 WARNING: only use liquid products; the washing machine is set to automatically dose additives at each cycle during the last rinse. l compartment "2": for 10 washing detergent. A liquid detergent cup is also included IN SOME MODELS (fig. 10).
Maximise the load size 4. PRACTICAL HINTS detergent and time by using the recommended maximum load size. Save up to 50% energy by washing a full load instead of 2 half loads.
The use of ecological detergents without phosphates may cause the following effects: When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results. - cloudier rinse drain water: This effect is tied to the suspended zeolites which do not have negative effects on rinse efficiency.
l Fill the drawer with hot water. EN 5. CLEANING AND MAINTENANCE Looking after your appliance correctly can extend its lifespan. Cleaning the appliance’s exterior l Disconnect the machine from the power supply. l Clean the appliance’s external cabinet, using a damp cloth and AVOIDING ABRASIVES, ALCOHOL AND/OR DILUENTS. Drawer cleaning l Shake the drawer in order to let the water l It is advisable to regularly clean the flow in all the compartments.
Cleaning the pump filter l The appliance has a special filter that traps larger residues that could block the draining system, such as buttons or coins (depending on the model, consider version A or B). We recommend checking and cleaning the filter 5 or 6 times a year. l Disconnect the machine from the power supply. l Ensure all the water has been emptied from the drum. l Before unscrewing the filter, we recommend you place an absorbent cloth under it to keep the floor dry.
This appliance is equipped with Wi-Fi technology that allows you to control it remotely via App. * OFF MACHINE ENROLLMENT (ON APP) l Download the Candy simply-Fi App on your device. * REMOTE CONTROL (Wi-Fi) The Candy simply-Fi App is available for devices running both Android and iOS, both for tablets and for smartphones. TO DISABLE REMOTE CONTROL l To exit REMOTE CONTROL mode while Get all the details of the Wi-Fi functions by browsing the App in DEMO mode.
7. QUICK USER GUIDE This appliance automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times. 8. CONTROLS AND PROGRAMS Pre Kg Detector Program selection A l Turn on the appliance and select the required program. I l Adjust the washing settings if necessary Pre and select the required options.
parameters, press PLAY/PAUSE. When the programme is running, the display will show the time to elapse. Don’t touch the buttons while inserting the plug because the machines calibrates the systems during the first seconds: touching the buttons, the machine couldn’t work property. In this case, remove the plug and repeat the operation. l Moreover, If you want to modify the chosen program, press the desired options buttons, modify the default parameters and then press PLAY/ PAUSE button to start the cycle.
PAUSING THE MACHINE l Keep the PLAY/PAUSE button pressed for about 2 seconds (some light indicators and the residual time display will flash, showing that the machine is paused). - Confirm by pressing the PLAY/PAUSE button. The delay countdown will begin and when it has finished the programme will start automatically. l You can cancel the start delay by turning the SMART RING to the OFF position.
over the maximum allowed for the programme, in order to protect the fabrics. Activated when you set 60°C of temperature. This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash. l If you want carry out a cold wash all the indicators must be off. If an option is selected that is not compatible with the selected programme then the option indicator light first flashes and then goes off.
If you want carry out a cold wash all the indicators must be off. STEAM button This button allows a specific treatment to follow certain wash cycles (please refer to the program table). The steam function works by relaxing creases in wet garments and as a result reduces the time needed to iron these items. The fibres are regenerated and refreshed by removing bad smells.
- adjusts the rhythm of drum rotation for the type of fabric being washed; 9) Wi-Fi INDICATOR LIGHT indicates the status of the connection. It could be: - FIXED ON: remote control enabled. - adjusts the spin speed according to the load, thus avoiding any imbalance. - SLOW FLASHING: disabled. 5) KEY LOCK INDICATOR LIGHT The indicator light show that the keys are locked.
Table of programmes 1) (MAX.) * PROGRAMME 2 (see control panel) (MAX.
INFORMATION FOR THE TEST LABORATORIES STANDARD PROGRAMMES ACCORDING TO (EU) No 1015/2010 e No 1061/2010 (Only for models with liquid detergent compartment) When only a limited number of articles have stains which require treatment with liquid bleaching agents, preliminary removal of stain can be carried out in the washing machine. Pour the bleach into the liquid bleach container, inserted into the compartment marked "2" in the detergent drawer, and set the special programme RINSE.
Description of programmes To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need of washing (see table of programmes). Choose programme in accordance with the laundry instructions appearing on labels, especially the maximum recommended temperature. SPORT PLUS 29' Created to remove dirt from technical garments used in the gym and for sports. The programme washes for 29 minutes at a low temperature.
ECO 40-60 The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the EU Ecodesign legislation (environmentally friendly products design). SYNTHETIC AND COLOURED This programme allows you to wash different type’s fabrics and different colours all together. The rotation movement of the drum and the water levels are optimized, both during the washing the rinsing phase.
9. TROUBLESHOOTING AND WARRANTY If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems. ERROR CODE FORMAT l Models with a display: the error is shown by a number preceded by the letter “E” (example: E2 = Error 2). l Models without display: an error is shown by a sequence of flashes of every LED.
Problem Possible causes and practical solutions The washing machine does not work / start The washing machine does not spin Make sure the product is plugged into a working supply socket. Make sure power is on. Make sure the wall socket is working, testing it with another appliance such as a lamp. The door may not be correctly closed: open and close it again. Check whether the required program was correctly selected and the start button pressed.
It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres. Warranty The product is guaranteed under the terms and conditions stated on the certificate included with the product. The certificate has to be stored so as to be shown to the Authorized Customer Service Centre in case of need. You can also check the warranty conditions on our web site.
Parameter Specifications (Wi-Fi) Specifications (Bluetooth) Wireless Standard 802.11 b/g/n Bluetooth v4.2 Frequency range 2,412 GHz. - 2,484 GHz. 2,412 GHz. - 2,484 GHz. 802.11b, DSSS 1 Mbps = +19.5 dBm Basic data Rate: RF Transmit Power (Typ): +4 dBm 802.11b, CCK 11 Mbps = +18.5 dBm Max Transmit Power 802.11g, OFDM 54 Mbps = +18.5 dBm 802.11n, MCS7 = +14 dBm 802.11b = 1024 bytes, -80 dBm 802.11g = 1024 bytes, Minimum Receiving Sensitivity -70 dBm 802.11n = 1024 bytes, -65 dBm 802.
- WM Rapidó (NEL) - 19.12 - 43032612 - IDM s.r.l.