MAINTENANCE AND USER’S GUIDE EN Smart Touch Smart Fi+
ENGLISH pg. 1--12 Congratulations on purchasing this fridge, which has been designed using the latest technologies for an easy-to-use, environmentally friendly appliance. We recommend you read this guide and the technical datasheet carefully to find out everything you need to know about your new fridge. CONTENTS EN SAFETY INFORMATION ...................................................... 2--2 INSTALLATION .................................................................... 3--3 OPERATION ..............
Thank you for purchasing this product. Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners.
Scrapping old appliance Appliance start-up Remove all wrapping/packaging present inside the appliance and clean with water and baking soda or neutral soap. After the installation, wait 2 - 3 hours to allow time for the refrigerator/ freezer to stabilize at normal working temperature, before placing fresh or frozen foods inside. If the power cord becomes disconnected, wait at least five minutes before restarting the refrigerator/ freezer. At this point, the appliance is ready for use.
SMART TOUCH (only for connected product) NEXT TIME – Regular usage This appliance is equipped with Smart Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function. • Every time you want to manage the machine through the App, first you have to enable the Smart Touch mode by turning on the Smart Touch button.
SMART Fi+ WI-FI RESET This appliance is equipped with SMART Fi+ technology that allows you to control it remotely via App, thanks to Wi-Fi function. To reset Wi-Fi, use the button will be the following condition: MACHINE ENROLLMENT (ON APP) • Blinking Wi-Fi LED • Download the Candy simply-Fi App on your device. • Switched on NFC LED with a single long pressure.
Check that on the indicator of the temperature, the word OK is clearly shown. (fig.4 ) If the word does not appear, this means that the temperature is too high: adjust the temperature to a cooler setting and wait for about 10 hours. Recheck the indicator: if necessary, proceed with a new adjustment. CONSERVATION • To maintain the best flavour, nourishment and freshness of foods, it is advisable to store them in the refrigerator compartment as shown in fig.
FREEZING DEFROSTING • Foods must be fresh. • Freeze small amounts of food at a time in order to freeze quickly. Never exceed the maximum amount indicated on the rating label. • During freezing, do not open the freezer door. • Food must be sealed, airtight. • Separate food to be frozen by those already frozen. • Label bags or containers to keep an inventory of frozen foods. Defrosting the refrigerator compartment During normal functioning, the refrigerator is automatically defrosted.
IMPORTANT: Defrosting the freezer compartment To prevent cracking of the inside surfaces and plastic parts, follow these suggestions: • Wipe away any food oils adhered to plastic components. • The internal parts, gaskets and external parts can be cleaned with a cloth with warm water and baking soda or a neutral soap. Do not use solvents, ammonia, bleach or abrasives. • Remove the accessories, for example, the shelves, from the refrigerator and from the door. Wash in hot soapy water.
REVERSING THE OPENING OF THE DOORS Remove the upper plate and hinge by screw driver. Remove the bottom door. Reassemble the doors and hinges workings from bottom to top, from 1-4. Use the opposite hinge and cover and fit into the left bottom 7 EN 9 1771 1769mm 812mm 60 812mm 1775 50 PRODUCT DIMENSIONS AND BUILT-IN COMPARTMENT 35 Remove the right bottom hinge and left plastic plugs, and refit them onto the opposite side. Remove the middle hinge and its connecting pin underneath .
INSTALLATION OF THE APPLIANCE IN THE COLUMN Insert the appliance into the column, placing it on the opposite site of the hinges, and make sure 3-5 mm distance gap. After ensuring the match between appliance door and column door, then screw the appliance upper part to the cabinet 1 2 Fit the seal to the appliance, cut off the excessive part if necessary. Fit the bottom parts with plastic covers.
COUPLING OF THE PANELS OF THE BUILT-IN COLUMN OF THE APPLIANCE DOORS The appliance is equipped with coupling devices for the appliance doors with the column panels (loader slide). Secure the slide in the inner part of the panel of the built-in column at the desired height and at approx. 20 mm. From the outer wire of the door.
TROUBLESHOOTING PROBLEM The inside illumination light bulb does not turn on. CAUSE • Electricity absence. • Door switch is blocked. The refrigerator and freezer do not sufficient- • The doors are not closed. ly cool. • The doors are frequently opened • Erroneous setting of the temperature. • The refrigerator and freezer have been excessively filled. • Surrounding temperature is too low. • No electrical power. REMEDY • The power cord is not properly plugged in.
05/2017 CANDY HOOVER GROUP Strada Eden Fumagalli, 1 20861 Brugherio (MB) Italy
EN FOR appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing foodstuffs FOR a free standing appliance: this refrigerating appliance is not intended to be used as a built-in ppliance FOR Wine Coolers: this appliance is intended to be used exclusively for the storage of wine FOOD STORAGE Position different food in different compartments according to be below table Refrigerator compartment Door or balconies of fridge compartment Crisper drawers (salad drawer) Fridge
- Tropical (T): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’ AVAILABILITY OF SPARE PARTS “Thermostats, temperature sensors, printed circuit boards and light sources are available for a minimum period of seven years after placing the last unit of the model on the market.