User Manual

13
BULB REPLACEMENT
Important :  The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
 Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact to hands.
 When handling blubs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the blub as this can reduce the life of the blub.
Note:
 Before changing the lights that the cooker hood can be isolated from the supply
mains by means of a plug or an all-pole switch.
 Protect against danger when changing lights, such as wearing gloves.
Changing the light
 Switch off the appliance and make sure it’s disconnected from the mains supply.
 You should use a suitable screwdriver to pry up one end of the light and take it out
for replacement.
ILCOS D code for this lamp is: DBS-2/65-H-120/33
– LED modules –rectangle LED lamp
– Max wattage: 1×2 W
– Voltage range: AC 110-240V
– Dimensions:


