User Manual

Table Of Contents

INSTALLATION (VENT OUTSIDE)

MOUNTING OF THE V-FLAP

If the cooker hood does not have an assembled V-flap 1, you should mount the half-

parts to its body. The images only show an example of how to mount the V-flap,the

outlet may be various according to different models and configuration.

To mount the V-flap 1 you should:

• Mount two half-parts 2 into the body 6

• a pin 3 should be top oriented;

• the axis 4 should be inserted in the holes 5 on body;

• repeat all the operations for the 2nd half-part

INSTALLATION (Wall Mounting)

1. Decide the location of the holes for fixing the cooker hood.

2. Install the L-shaped bracket on the top of the hood by two screws (4mm x 10mm)