User Manual

Do not use the
product if the fluff filter is not in
position or is damaged; fluff
could be ignited.
Where the hot
surface symbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60 degrees
C.
Remove the plug from the
electricity supply. Always
remove the plug before cleaning
the appliance.
Do not continue to use this
machine if it appears to be faulty.
Lint and fluff must not be
allowed to collect on the floor
around the outside of t
he
machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
Never stop a tumble
dryer before the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
Maximum load drying weight:
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important: During transport
ensure that the dryer is in an
upright position, if it's necessary
you can only flip in the side shown;
different side, wait at least 4 hours
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
could result in damage to the
compressor.
WARNING
Do not use the
p he fluff filter is not in
position or is damaged; fluff
could be ignited.
WARNING Where the hot
ymbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60 degrees
C.
Remove the plug from the
electricity supply. Always
remove the plug before cleaning
the appliance.
Do not continue to use this
machine if it appears to be faulty.
Lint and fluff must not be
allowed to collect on the floor
around the outside of t
he
machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
WARNING: Never stop a tumble
e the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
Maximum load drying weight:
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important: During transport
ensure that the dryer is in an
upright position, if it's necessary
you can only flip in the side shown;
Caution: If the product is in
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
could result in damage to the
compressor.
WARNING Do not use the
product if the fluff filter is not in
position or is damaged; fluff
could be ignited.
WARNING
Where the hot
mbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60 degrees
Remove the plug from the
electricity supply. Always
remove the plug before cleaning
the appliance.
Do not continue to use this
machine if it appears to be faulty.
Lint and fluff must not be
allowed to collect on the floor
around the outside of t
he
machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
WARNING: Never stop a tumble
dryer before the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
oad drying weight:
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important: During transport
ensure that the dryer is in an
upright position, if it's necessary
you can only flip in the side shown;
Caution: If the product is in
different side, wait at least 4 hours
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
compressor.
WARNING Do not use the
product if the fluff filter is not in
position or is damaged; fluff
could be ignited.
WARNING Where the hot
surface symbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60 degrees
C.
Remove the plug from the
electricity supply. Always
remove the plug before cleaning
the appliance.
Do not continue to use this
machine if it appears to be faulty.
Lint and fluff must not be
allowed to collect on the floor
around the outside of t
he
machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
s that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
WARNING: Never stop a tumble
dryer before the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
Maximum load drying weight:
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important: During transport
ensure that the dryer is in an
upright position, if it's necessary
you can only flip in the side shown;
Caution: If the product is in
different side, wait at least 4 hours
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
could result in damage to the
compressor.
WARNING Do not use the
product if the fluff filter is not in
position or is damaged; fluff
could be ignited.
WARNING Where the hot
surface symbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60 degrees
C.
Remove the plug from the
electricity supply. Always
remove the plug before cleaning
the appliance.
Do not continue to use this
machine if it appears to be faulty.
Lint and fluff must not be
allowed to collect on the floor
around the outside of t
he
machine.
The final part of a tumble dryer
s without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
WARNING: Never stop a tumble
dryer before the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
Maximum load drying weight:
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important: During transport
ensure that the dryer is in an
upright position, if it's necessary
Caution: If the product is in
different side, wait at least 4 hours
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
could result in damage to the
compressor.
WARNING Do not use the
product if the fluff filter is not in
position or is damaged; fluff
could be ignited.
WARNING Where the hot
surface symbol is located
the temperature rise during
operation of the tumble dryer
may be in excess of 60 degrees
C.
Remove the plug from the
electricity supply. Always
remove the plug before cleaning
the appliance.
Do not continue to use this
machine if it appears to be faulty.
fluff must not be
allowed to collect on the floor
around the outside of t
he
machine.
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
WARNING: Never stop a tumble
dryer before the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
Maximum load drying weight:
see energy label.
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important: During transport
ensure that the dryer is in an
upright position, if it's necessary
you can only flip in the side shown;
Caution: If the product is in
different side, wait at least 4 hours
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
could result in damage to the
compressor.
WARNING
WARNING
WARNING
CAUTION:
,I WKH SURGXFW LV LQ