User Manual
Table Of Contents
- Ò³Ãæ 1
- Ò³Ãæ 2
- Ò³Ãæ 3
- Ò³Ãæ 4
- Ò³Ãæ 5
- Ò³Ãæ 6
- Ò³Ãæ 7
- Ò³Ãæ 8
- Ò³Ãæ 9
- Ò³Ãæ 10
- Ò³Ãæ 11
- Ò³Ãæ 12
- Ò³Ãæ 13
- Ò³Ãæ 14
- Ò³Ãæ 15
- Ò³Ãæ 16
- Ò³Ãæ 17
- Ò³Ãæ 18
- Ò³Ãæ 19
- Ò³Ãæ 20
- Ò³Ãæ 21
- Ò³Ãæ 22
- Ò³Ãæ 23
- Ò³Ãæ 24
- Ò³Ãæ 25
- Ò³Ãæ 26
- Ò³Ãæ 27
- Ò³Ãæ 28
- Ò³Ãæ 29
- Ò³Ãæ 30
- Ò³Ãæ 31
- Ò³Ãæ 32
- Ò³Ãæ 33
- Ò³Ãæ 34
- Ò³Ãæ 35
- Ò³Ãæ 36
- Ò³Ãæ 37
- Ò³Ãæ 38
- Ò³Ãæ 39
- Ò³Ãæ 40
- Ò³Ãæ 41
- Ò³Ãæ 42
- Ò³Ãæ 43
- Ò³Ãæ 44
- Ò³Ãæ 45
- Ò³Ãæ 46
- Ò³Ãæ 47
- Ò³Ãæ 48
- Ò³Ãæ 49
- Ò³Ãæ 50
- Ò³Ãæ 51
- Ò³Ãæ 52
- Ò³Ãæ 53
- Ò³Ãæ 54
- Ò³Ãæ 55
- Ò³Ãæ 56
- Ò³Ãæ 57
- Ò³Ãæ 58
- Ò³Ãæ 59
- Ò³Ãæ 60
- Ò³Ãæ 61
- Ò³Ãæ 62
- Ò³Ãæ 63
- Ò³Ãæ 64
- Ò³Ãæ 65
- Ò³Ãæ 66
- Ò³Ãæ 67
- Ò³Ãæ 68
- Ò³Ãæ 69
- Ò³Ãæ 70
- Ò³Ãæ 71
- Ò³Ãæ 72
- Ò³Ãæ 73
- Ò³Ãæ 74
- Ò³Ãæ 75
- Ò³Ãæ 76
- Ò³Ãæ 77
- Ò³Ãæ 78
- Ò³Ãæ 79
- Ò³Ãæ 80
- Ò³Ãæ 81
- Ò³Ãæ 82
- Ò³Ãæ 83
- Ò³Ãæ 84
- Ò³Ãæ 85
- Ò³Ãæ 86
- Ò³Ãæ 87
- Ò³Ãæ 88
- Ò³Ãæ 89
- Ò³Ãæ 90
- Ò³Ãæ 91
- Ò³Ãæ 92
- Ò³Ãæ 93
- Ò³Ãæ 94
- Ò³Ãæ 95
- Ò³Ãæ 96
- Ò³Ãæ 97
Before removing the light bulb, either unplug the refrigerator or disconnect
the electricity leading into the refrigerator at the main power supply. Failure
to do so could result in electrical shock or personal injury.
There is a 4 to 6 C variance between the top and bottom shelves of the
wine chiller. Therefore, If you have set the wine chiller for red wine only
and you want to place a mix of white and red wines, you should place the
white wine bottles on the bottom shelves and the red wines on the top
shelves.
CHANGING THE LIGHT BULB
CARE AND MAINTENANCE
All parts removed must be saved to do the replacement of the light bulb.
NOTE:
There is an additional wine rack at bottom section of the unit where you
can store up to 6 wine bottles. This rack is removable for cleaning purpose.
Shelf is chrome plated. To accommodate different size bottles, they
can be moved up or down by sliding them out the tracks first. Shelves are
designed to accommodate maximum amount of bottles.
Wine Rack
Shelves
6
Light bulb should not exceed 5 watts.
It may also be necessary to periodically wipe the bottom part of the storage
area,as the wine cooler is designed to retain humidity, and condensation
may collect there.
Most power failures are corrected within a few hours and should not
affect the temperature of your wine cooler if you minimize the number
of times the door is opened. If the power is going to be off for a longer
period of time, you need to take the proper steps to protect your contents.
Power Failure
Maintenance of Your Wine Cooler
The outside of the wine cooler should be cleaned with mild detergent and
warm water.
Wash the shelves and trays with a mild detergent solution.
Wash the inside with a warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a liter of water.
Unplug the wine cooler, and remove the bottles.
Cleaning Your Wine Cooler