User Manual

8
 Internal light
In order to reduce energy consumption, this wine cabinet will automatically switch off the LED
lights after 10 minutes.
If you want the LED light to remain on continuously, this is possible. Please press and hold the
"LIGHT" button for 5 seconds, the display will show "LP".After 4 seconds the display will revert
back to normal and the light will remain on until manually switched off.
If you want to revert back and conserve energy (recommended), please press and hold the
"LIGHT" button for 5 second, the display will show "LF",after 4 seconds the display will revert
back to normal, and the light will automatically switch off after 10 minutes.
 Temperature Alar
m
If the temperature inside is higher than 23 ℃, it will display "HI" on the display panel, and after
one hour after the alarm / buzzer will sound. This indicates that the temperature inside is too
high. If the temperature inside is lower than 0 ℃, it will display "LO" on the display panel and at
the same time the alarm also malfunction indicator is active.
 Temperature Recollection Function
In the event of a power interruption, wine chiller can remember the previous temperature
settings, and when the power is recovery, the cooler temperature will go back the same setting
temperature as power off.
 Note
• If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine cooler will not start.
• When you use the Wine cooler for the first time or restart the Wine cooler after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the Wine cooler is running for a few hours everything will be back to
normal.