Manual

Attention
This dishwasher is equipped with an anti-overflow safety device
which works even when power is switched off, and if the water
level is too high the supply will automatically be closed off.
Important
To ensure the correct operation of the anti-overflow safety
device, it is recommended not to move or to tilt the dishwasher
during operation.
If it is necessary to move or to tilt the dishwasher, first make
sure the washing cycle is finished and that no water is left in
the tank.
To set the programme, turn the dial clockwise until the pointer
( ) indicates the symbol of the required programme on the
control panel. Then press the On/Off button. Ensure that the
water supply is turned on and the door is closed properly.
“65°C INTENSIVE” button
This button is an option available on the “UNIVERSAL
INTENSIVE” and “DAILY INTENSIVE” programmes which
will increase the temperature of the water of washing from
50°C to 65°C.
Selecting the programme and special functions
Use in conjunction with programme guide
23
22
Description of the controls
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage
12
8 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
Height
Depth
Width
Depth with door open
cm
cm
cm
cm
with working top
85
60
60
120
Technical Data
Dimensions:
without working top
82
56,3
59,8
117
A On/off button
B “65°C INTENSIVE” button
C Door handle
D Programme selector
E Mains indicador light
AB C D
E
65°C
INTENSIVE