Washer Dryer Instructions for use CDB 754 D
Introduction Contents Please read these instructions for use carefully and all other information enclosed with the washing machine. Keep all documentation in a safe place for future reference or for any future owners.
General delivery notes On delivery check that there is the following with the appliance: – Instruction manual – Certificate of guarantee – Caps – Inlet hose and check that no damage has occurred during transit, and if so, call your nearest Authorised Technical Support Service agent (see Customer Service) M) N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed.
Description of controls “KG DETECTOR” (Function active only on Cotton and Synthetics programmes) Through every wash phase “KG DETECTOR” allows to monitor information on the wash load in the drum.
A Door open button Press the button to open the door. Important: a special safety device prevents the door from opening at the end of the wash/spin cycle. at the end of the spin phase wait up to 2 minutes before opening the door. “DOOR SECURITY” indicator light B The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON. When "Start/Pause" is pressed on the machine with the door closed the indicator will flash momentarily and then illuminate.
It is possible to cancel the delay start by taking the following action: Press and hold the button for 5 seconds until the display will show the settings for the programme selected. At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button or to cancel the process by setting the selector to the OFF position and then selecting another programme.
6 { { 5 { 4 3 { { 8 2 1 6) KG DETECTOR indicator Available on Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent sensor will weigh the laundry and adjust the cycle time, water and electricity consumption accordingly. 7) DRYING PROGRAMME INDICATORS The indicators display the type of the drying programme: Candy washer dryers incorporate an Automatic Sensor Drying function which takes the guesswork out of setting the drying time.
TABLE OF PROGRAMMES PROGRAMME SELECTOR ON: PROGRAM FOR: WEIGHT RECOMMENDED MAX TEMP. kg °C MAX TEMP. °C CHARGE DETERGENT II Resistant fabrics 1) I 7 60° Up to: 90° ● ● 7 40° Up to: 60° ● ● 3,5 40° Up to: 50° ● ● Very delicate fabrics 2,5 40° Up to: 40° ● ● “MACHINE WASHABLE” woollens 2 40° Up to: 40° ● ● Information for the test laboratories (Ref.
Programme selector TABELLA PROGRAMMI PROGRAMMA PER: For the various types of fabrics and various degrees of dirt the washing machine has different programme bands according to: wash cycle, temperature and lenght of cycle (see table of washing cycle programmes). SELEZIONE PUNTATORE MANOPOLA PROGRAMMI SU: Tessuti resistenti otone, lino, canapa otone, misti resistenti Cotone resistente - suti misti e sintetici Misti resistenti TEMP.
“SHIRTS” PROGRAMME This programme allows a complete washing cycle for shirts. The main wash and the rinse gives best results thanks to the rotation rhythms of the drum and to the water levels. The programme has a maximum temperature of 40°C and concludes with 3 rinses and a short spin.
Dosages Detergents, washing aids and amounts to use Choice of detergent General purpose detergents - - Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry. Liquid detergents, particularly suitable for grease stains, such as greasy skin marks, cosmetics and oil. These detergents are not suitable for washing stained laundry, as they do not contain bleach.
Useful advice for users Main wash Sorting the laundry - It is recommended you wash only items which are machine washable with water and detergent and not dry-clean items. - If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
The correct way to wash DRYING Preparing the laundry A) Select the laundry. DON’T DRY GARMENTS MADE FROM FOAM RUBBER OR FLAMMABLE MATERIALS. Loading the laundry B) Open the porthole. C) Put the laundry in the washing machine. Close the porthole again, ensuring that no items of laundry are obstructing the lock. Putting detergent in machine D) Open the drawer, choose the detergent and put in the correct amount, according to the manufacturer’s instructions and the advice on page 20.
Automatic washing/drying Warning: only a maximum 5 kg of dry laundry can be loaded otherwise the dried laundry will be not satisfactory. WASHING: Open the drawer, choose the detergent and put in the correct amount. Refer to the list of washing programmes according to fabrics to be washed (e.g. very dirty cotton) and without pressing Start button, prepare wash as described: Turning the selector knob, the required programme is activated. The display will show the settings for the programme selected.
Table of drying times (in minutes): PROGRAMME Extra Cupboard Iron COTTON Cleaning and routine maintenance Do not use alcohol-based scourers and / or thinners on the outside of your washing machine, just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance: - Cleaning the drawer compartments. - Cleaning the door glass.
Investigating malfunctions What might be the cause of… Defects you can remedy yourself MALFUNCTION CAUSE REMEDY 1. Does not work on any programme Plug not in socket. Not switched on. Power failure. Fuse blown. Door open. Plug it in. Switch on. Check. Check. Close door. 2. Does not fill with water See cause 1. Tap turned off. Programme selector not correctly positioned. Fill hoses are kinked Check. Turn on tap. Position programme selector correctly. Straighten fill hoses 3.
SETTING UP + INSTALLATION 1 Remove the polystyrene base and place the machine near its permanent position (diagram 1). Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2). Remove the 3 fixing screws marked (A) and remove the 3 spacers marked (B) (diagram 3). 2 Remove the screw (C). A spacer will fall inside the machine. By tilting the machine, remove the above mentioned spacer. Cover the 4 holes using the caps provided in the instruction booklet pack (diagram 4). Fig.
Note: we recommend you keep the screws to immobilise the machine for future transit. The Manufacturers will not be responsible for any possible damage to the machine caused by not following the rules relating to releasing the mechanism. The user is responsible for all costs of installation. Note: it is advisable to turn off the tap after each wash to isolate the washing machine from the water supply.
The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste.