Operation Manual

GB
INSTRUCTIONS FOR
MOUNTING DOOR
Drill holes in the door
using the cardboard
template as indicated in
Fig. 1 to mount the hinges
and closure magnet in
the right or left-hand
position according to
your requirements. The
position of the hinges
refers to the upper edge.
Screw the hinges in place
with the 4 screws (A).
Screw on the magnet (B)
with screw (C).
Mount the plate (D) in the
right or left-hand position,
according to your
requirements. Place the
rubber washers under the
plate and screw in place
with screw (G).
Snapmount cap (H) in the
lower position.
EN
INSTRUCTIONS FOR
MOUNTING DOOR
Drill holes in the door
using the cardboard
template as indicated in
Fig. 1 to mount the hinges
and closure magnet in
the right or left-hand
position according to
your requirements. The
position of the hinges
refers to the upper edge.
Screw the hinges in place
with the 4 screws (A).
Screw on the magnet (B)
with screw (C).
Mount the plate (D) in the
right or left-hand position,
according to your
requirements. Place the
rubber washers under the
plate and screw in place
with screw (G).
Snapmount cap (H) in the
lower position.