User Manual

16
For setting up an alarm push briefly once the knob till getting ALARM icon flashing. The turn the knob, set up the alarm time and
briefly push once the knob to confirm; ALARM icon will stay on for all the set up time. When set up time is over an acoustic buzz
will be activated. Push again briefly once the knob for going back to time display.
For cancelling minute minder set up keep the knob pushed until ALARM icon goes off.
USING THE 3 KEYS ELECTRONIC PROGRAMMER (fig.44)
The first start up
The numbers and the A letter on the display are blinking when the oven is switched on for the first time, or after a
power cut:
the appliance cannot be operated in this condition.
To set the hour and/or to enable the appliance to operate press the M key for at least 2 seconds: the A letter turns off
and the numbers now are steady on the display.
The dot (3) starts blinking: press the - or
+ key to set the hour.
The hour is accepted by the programmer just few second after having released the key.
N.B. the appliance can be correctly used for coking only when you will see on the display the symbol (2).
The symbols on the display:
1 A *
Automatic programme is working.
(* in some models there is the writinq 'Auto' instead of A).
2
The appliance is ready for manual use (not automatic).
3 •
When blinking, the programmer is in setting hour mode.
4
Timer set.
5 -
Decreasing numbers when setting the timer.
Also for choose your desired sound level ( 3 levels available).
6
M
"Mode" kev to access the programming options of the programme.
7 +
Increasing numbers when setting the timer.
Timer
The purpose of the timer is just of a sound signal, which can be set for a max time of 23h59min. once elapsed the set
time, the (4) symbol turns off and a sound signal is heard; this sound set off automatically in 7min, or you can stop it
by pressing any key of the programmer. To set the timer press the M key for 2 seconds, or anyway just to see the (4)
symbol blinking. Set the timer by using the
+ or - keys. Release the + or - key when you have matched your desired
time. In a few seconds the current time appears on the display together with the ) symbol. The countdown starts
immediately from now on.
Semi-automatic cooking
Cooking time: Once having selected a coking function and set the desired temperature, press the M key for a 2
seconds time to access the programming mode. The (4) symbol appears. Release and press again the M key. On the
display, the A symbol starts blinking and the " dur " writing appears on the display, then it changes to O' 00. Set the
cooking time with the - or
+ keys. (max available time: 10h). The selected time is automatically processed by the
programmer in a few seconds, or you can also touch the M key many times just to see again the current time.
The A and (2) symbols will be on the display. Once the set cooking time is finished, a sound will be heard and the
oven automatically switches off. Please see the following paragraphs about how to disable the sound alarm and
restarting the oven.
End of cooking
once having selected a cooking function and set the desired temperature, touch the M key to access the
programming mode for at least 2 sec. the ) symbol switches on. Release and touch again the M key.
On the display the A symbol starts blinking and the writing "dur" appears. Touch again the M key. On the display the
writing "End" appears. The last one changes few seconds after with the symbol 0· 00.
Set the end of cooking time with the keys - or
+. (maximum available time: 10hOOm).
The selected time is automatically processed by the programmer in a few seconds, or you can also touch the M key
many times just to see again the current time.
The cooking immediately starts, while on the programmer display the current time is shown again in a few seconds.
The A and (2) symbols will be on the display.
Once the set end of cooking time is finished, a sound will be heard and the oven automatically switches off. Please
see the following paragraphs about how to disable the sound alarm and restarting the oven.
Automatic cooking
Set a cooking time following the instructions on the cooking time paragraph, then set the end of cooking time
following the instructions on the previous paragraph. (Max available end of cooking time 24h). The oven automatically
switches on at a determined time which is the difference between the end of cooking time and the cooking time.
During the waiting time before cooking, which goes from the oven start to the heating, on the display appears the A
symbol to show that an automatic program is on and the current time. The oven on is marked by the (2) symbol.
Once the set end of cooking time is
finished, a sound will be heard and the oven automatically switches off.
Please see the following paragraphs about how to disable the alarm and restarting the oven.
How to disable the sound alarm: To disable the sound just touch one of the keys.
Operating again the oven
Once a semi-automatic or automatic cooking has expired, on the display appear the current time and the blinking A
symbol. In this condition, the heating elements and the light bulb of the oven are disabled. To enable again the oven,