User Manual

17
just touch and keep the M key up to see the symbol (2) on the display and the A symbol disappears.
OTHER FUNCTIONS
How to delete a cooking time
(semi-automatic or Automatic)
To delete a semi-automatic or automatic cooking program, with the A symbol on, touch together the - and
+ keys for
at least 2 seconds or anyway up to see the (2) and the disabling of A symbol.
How to delete the countdown timer
To delete the counting of the timer, which symbol is ) t touch the M key for at least 2 seconds or anyway up to see the
) symbol blinking. Touch together the - and
+ keys.
Checking the function settings
The set or remaining time of every cooking function of the programmer can be recalled to the display by entering in
program mode with the M key. Touch and keep the M key for almost 2 seconds or anyway up to see the (4) symbol.
The remaining time appears on the display, or a series of zero numbers if the timer is disabled. Touch again the M
key. On the display appears the "dur" writing, then alternately the remaining time or a series of zero number (disable
timer).
By touching again the M key, the end of cooking time appears together with the "End" writing.
How to change the current time or the sound level
With the programmer in standard mode, the (2) symbol is on, touch together the - and + keys for at least 2 seconds
or anyway up to see the dot (3) blinking.
To update the hour on the display: touch the + or - keys.
To change the sound level: touch the M key. On the display appears the writing: Ton.. followed by a number. Select
with the - key your favourite sound level.
Note: number 1 is referred to the highest sound level. The available levels are 3.
Attention: Power cut causes the loss of any program, even the clock; that means the programmer will have to be set
again.
ELECTRONIC TIMER PROGRAMMER (Fig. 45)
Setting
Select a function by pressing the function button and set the required time with the +/- buttons.
+/- buttons
Pressing the “+” button increases the time set, pressing “-“ decreases it. The count-up and countdown speed increases the
longer the button is held in the appropriate position
Setting the time of day
Select the time of day function by pressing the duration and end time button together and set the time of day with the +/-
buttons.
Any programme which has been set is cancelled and the outputs switched on
Manual operation
Press duration and end time button together. The relay contacts will switch on. The “A” symbol will be erased, the pot symbol
illuminated. Any programme which has been set is cancelled.
Semi-automatic operation with cooking duration
Select the cooking duration function and set the required duration with +/- button. “A” and cookpot symbol appear. The relay
output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are switched off.
The audible signal sounds. The symbol “A” blinks.
Semi-automatic operation with cooking end time
Select the cooking end time function and set the required duration with +/- button. “A” and cookpot symbol will appear. The relay
output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are switched off.
The audible signal sounds and “A” blinks.
Fully automatic operation
Select the cooking duration function and set the required duration with +/- button. The “A” symbol appears. The relay is switched
on and the cookpot symbol appears. Select the cooking end time function and the earliest possible end time is displayed. Set
the required end time with the +/- buttons. The relay and the cookpot symbol are switched off.
The cookpot symbol appears again when time of day = the calculated start time.
After the automatic programme has ended, the symbol “A” blinks.
The audible signal is heard and the cook pot symbol and the relay are switched off.
Minute minder
Select the minute minder button and set required time with the +/- buttons. As the time set elapses the bell symbol is displayed.
After the time set has elapsed, the audible signal sounds.
Audible signal
The audible signal sounds at the end of a minute minder cycle or of a cooking programme for a period of 7 minutes. The signal
can be cancelled by pressing any function button. Pressing the “-“ button without having previously selected a function the
frequency of the signal changes. A selection from 3 possibilities can be made. The selected signal is audible as long as the time
the “-“button is pressed.
Programme start and verification
A programme which has been set is carried out after setting the time required. The “time to run” can be verified at any time by
selecting the appropriate function.
Setting error identification
The setting is correct if the time of day is in between the calculated cooking start and end times. If an error has been made, this
will be indicated by the audible signal and by the symbol “A” flashing. The faulty setting can be corrected by changing one or
both functions.
Cancelling programme
A programme can be cancelled by selecting the manual function. After a programme which has been set comes to an end, it is
automatically cancelled.