User Manual

Table of Contents
Components and Features 3
Description of the Appliances 4
Rating Label 5
How To Use Your Appliance 7
How To Keep Your Cooktop in Shape 8
Practical Advice 9
Safety is a Good Habit to Get Into 9
Gas conversion 11
Is there a problem? 12
Installation Instructions for Built-In 13
! CAUTION 20
2
The appliance is fitted with an adjustable, “L” shaped connector and a gasket for the
attachment to the gas supply. Should this connector have to be turned，If leakage is found
after the connector assembled, please replace the gasket (supplied with appliance).
The gas feed connector to the appliance is a threaded, male 1/2” connector for round gas pipe.
Gas Connection to Flexible Steel Pipe
The gas feed connector to the appliance is a threaded, male 1/2” connector for round gas pipe.
Only use pipes, tubes and gaskets that comply with current safety codes. The maximum length
of the flexible pipes must not exceed 2000 mm. Once the connection have been made, ensure
that the flexible metal tube does not touch any moving parts and not crushed.
Check the Seal
Once the appliance have been installed, make sure all the connections are properly sealed,
using a soapy water solution. Never use a flame.
How to load battery ( on those models fitted with battery box)
Open the battery box, and then place a 1.5V size “D” battery into the box.( take notice of the
direction)
Note:
a) "prior to installation, ensure that the local distribution conditions (nature of the gas and
gas pressure) and the adjustment of the appliance are compatible";
b) "the adjustment conditions for this appliance are stated on the label (or data plate)";
c) "this appliance is not connected to a combustion products evacuation device. It shall be
installed and connected in accordance with current installation regulations. Particular
attention shall be given to the relevant requirements regarding ventilation".
19