User Manual

The cylinder tap have to be readily accessible.
Overflow of liquid from pans of the hotplate shall not fall onto cylinder or its accessories.
The flexible tube shall not be in contact with sharp edges. No internal communication shall
exist between the cylinder compartment and the different parts of the appliance where burners
are placed.
The ventilation openings of the compartment cannot be obstructed when the appliance is
placed in position.
Gas Connection for Cooktop
The cooktop should be connected to the gas supply by an authorized installer. During
installation of this product it is essential to fit an approved gas tap to isolate the supply from the
appliance for the convenience of any subsequent removal or servicing. Connection of the
appliance to the gas mains or liquid gas tanks must be carried out according to the safety
standards currently in force, and only after it is ascertained that it is suitable for the type of gas
to be used. If not, follow the instructions indicated in the section entitled, If the cooktop is to be
connected to tanks containing liquid gas, use pressure regulators that comply with current
safety standards.
Important: To insure that the appliance operates safety, the gas is regulated correctly and
your appliance lasts overtime, make sure that gas pressure levels comply with the indications
given in Table 1, “Nozzle and Burner Specifications”.
Gas connection to Non-flexible Pipe
(Copper or Steel)
Connection to the gas source must be done in such a way as to not create any stress points at
any part of the appliance.
18
F E
CGV376BAP (LPG) / CGV376BAP (TG) / CGV376BAP (NG)
CGV376BAP (LPG) / CGV376BAP (TG) / CGV376BAP (NG)
Components and Features
A. Work Burners
B. Auxiliary Burners
C. Support Grid for Cookware
D. Control Knobs for Gas Burners
E. Ignitor for Gas Burners
F. Safety Device (only on certain models)
3