1 10 Congratulations on purchasing this fridge, which has been designed using the latest technologies for an easy-to-use, environmentally friendly appliance. We recommend you read this guide and the technical datasheet carefully to nd out everything you need to know about your new fridge. CONTENTS EN SAFETY INFORMATION ......................................................2--2 INSTALLATION ....................................................................3--3 OPERATION .................................
Thank you for purchasing this product. Before using your refrigerato r, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners.
Scrapping old appliance WARNING! THIS APPLIANCE MUST BE EARTHED. This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.
Check that on the indicator of the temperature, the word OK is clearly shown. (fig.4 ) If the word does not appear, this means that the temperature is too high: adjust the temperature to a cooler setting and wait for about 10 hours. Recheck the indicator: if necessary, proceed with a new adjustment. If you do not press the button (2) for more than 5 seconds, the settings will be saved. The temperature levels in advanced settings are set from warmest to coldest e.g. 2/2.1/2.3/2.
FRESH ZONE FREEZING DEFROSTING • Foods must be fresh. • Freeze small amounts of food at a time in order to freeze quickly. Never exceed the maximum amount indicated on the rating label. • During freezing, do not open the freezer door. • Food must be sealed, airtight. • Separate food to be frozen by those already frozen. • Label bags or containers to keep an inventory of frozen foods. Defrosting the refrigerator compartment During normal functioning, the refrigerator is automatically defrosted.
IMPORTANT: Defrosting the freezer compartment To prevent cracking of the inside surfaces and plastic parts, follow these suggestions: • Wipe away any food oils adhered to plastic components. • The internal parts, gaskets and external parts can be cleaned with a cloth with warm water and baking soda or a neutral soap. Do not use solvents, ammonia, bleach or abrasives. • Remove the accessories, for example, the shelves, from the refrigerator and from the door. Wash in hot soapy water.
REVERSING THE OPENING OF THE DOORS Remove the upper plate and hinge by screw driver. Remove the bottom door. Reassemble the doors and hinges workings from bottom to top, from 1-4. Use the opposite hinge and cover and fit into the left bottom 7 EN 7 1771 1769mm 812mm 60 812mm 1775 50 PRODUCT DIMENSIONS AND BUILT-IN COMPARTMENT 35 Remove the right bottom hinge and left plastic plugs, and refit them onto the opposite side. Remove the middle hinge and its connecting pin underneath .
INSTALLATION OF THE APPLIANCE IN THE COLUMN Insert the appliance into the column, placing it on the opposite site of the hinges, and make sure 3-5 mm distance gap. 1 After ensuring the match between appliance door and column door, then screw the appliance upper part to the cabinet 2 Fit the seal to the appliance, cut off the excessive part if necessary. Fit the bottom parts with plastic covers.
COUPLING OF THE PANELS OF THE BUILT-IN COLUMN OF THE APPLIANCE DOORS The appliance is equipped with coupling devices for the appliance doors with the column panels (loader slide). Secure the slide in the inner part of the panel of the built-in column at the desired height and at approx. 20 mm. From the outer wire of the door.
TROUBLESHOOTING PROBLEM The inside illumination light bulb does not turn on. CAUSE • Electricity absence. • Door switch is blocked. The refrigerator and freezer do not sufficient- • The doors are not closed. ly cool. • The doors are frequently opened • Erroneous setting of the temperature. • The refrigerator and freezer have been excessively filled. • Surrounding temperature is too low. • No electrical power. REMEDY • The power cord is not properly plugged in.
07/2016
