User Manual

The system is fitted with components that are subject to periodic replacement and for which it is not possible to foresee the actual life:
one of the most important parameter is the quality of the water (the higher the quality of the inlet water, the longer the average life of
the component). The components to be replaced can be bought by the technical assistance.
In case of a heavy use, the system will provide to inform the user about the need to replace a certain component subject to periodic
replacement.
Instructions for component replacement are supplied together with the component itself.
PERIODIC MAINTENANCE
NOTEFREQUENCY WATH WHO
6 MONTHS
12 MONTHS
In case a remarkable lack
of fizzing is noticed when
dispensing the drink.
7000 hours
12 MONTHS
PREFILTER
COMPOSITE FILTER
USER
TECHNICAL
ASSISTANCE
USERCO
2 BOTTLE
By only treating drinkable water with suspended
solids not bigger than 5 micron.
12 MONTHS
Or in case the unit has not
been used for a period longer
than 15 days.
SANITIZATION
WATER
SEAL CHECK
UV LAMP
By only treating drinkable water with suspended
solids not bigger than 5 micron..
The system sanitization must ALWAYS be carried
out if the unit has not been used for a period longer
than 15 days.
Ultraviolet rays could damage the hydraulic fitting
gaskets installed on the sterilizer.
The need to replace it is indicated by the system;
even if it regularly turns on, it might not be in a
position to grant the best sterilization of the discharged
water any longer.
It is advisable not to wait the complete consumption.
9 GB
USER PROGRAMMING
This paragraph indicates how to modify some parameters of the dispenser, such as the quantity of water to be supplied every time the
buttons are pressed, the refrigerator temperature, and so on. Being very simple, these operations can be carried out very safely by the
user.
To enter the programming functions, press buttons 2 and 3 at the same time.
OPERATIONMENU
VISUALIZATION ON
THE DISPLAY
Visualization / zero setting supplied doses of
still water
Given value indicates the total number of supplied doses
User programming cycle
Buttons and allow to scroll the menu.
Button allows to modify the parameter. By pressing it for a second time, after modifying the value, it saves the datum.
Total supplied doses
[XXXX]
Visualization / zero setting supplied doses of
sparkling water
Still water doses
[XXXX]
Visualization / zero setting supplied doses of
sparkling water
Given value indicates the total number of supplied doses of
still water
To set at zero press at the same time buttons
Sparkling water doses
[XXXX]
Given value indicates the total number of supplied doses of
sparkling water
To set at zero press at the same time buttons
Visualization / zero setting supplied doses of
sparkling water
Cold water doses
[XXXX]
Given value indicates the total number of supplied doses of
cold water
To set at zero press at the same time buttons
Visualization / zero setting supplied doses of
sparkling water
Hot water doses
[XXXX]
Given value indicates the total number of supplied doses of
hot water
To set at zero press at the same time buttons
TECHNICAL
ASSISTANCE
TECHNICAL
ASSISTANCE
TECHNICAL
ASSISTANCE