WASHING MACHINE CTD 10662-07 Code: 31002630
WASHING MACHINE CTD 10662 B1 G C1 A D C2 V B2 I C4 B3 C3 H Use this control to select the desired wash programme. Turn the selector (it can be turned in both directions) so that the programme is opposite the reference indicator (p). The temperature selected will depend on the programme. (See the Programme Table).
Programme table mod CTD 10662 aprox. time min. max. temp. setting ºC max. espin speed rpm/min max. load Kg.
B3 wash temperature When selecting a programme, the recommended wash temperature is automatically indicated, and the corresponding indicator lamp lights up. It is possible to lower or raise this temperature, by pressing the (B3) button. Note: The temperature must be adjusted before selecting DEGREE OF SOILING. 5.- Press the key or keys for any options desired (C1, C2, C3, C4). .- It is advisable to select the required options before pressing the Programme Start key (H). .
display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly. 7.- To start the programme, once options have been chosen, press the key H. The washing machine will begin to operate. If you wish to cancel the option you have selected, press the key again. (The pilot light will go off.
Introductión Read this manual carefully as it offers practical advice to help you get the most from your washing machine. This «Instruction and Installation Manual» contains everything you need to know about the everyday running of your machine. Please refer to this manual for installation and maintenance instructions. The manual also contains information about possible working problems, advice about sorting clothes for washing, an explanation of label symbols and hints about how to remove stubborn stains.
• The manufacturer fits all the machines with an earth connection. Ensure that the electrical installation has an earth connection and that it is connected; if not, call a qualified Service Center. The earth connection is essential for user safety as it eliminates the risk of electrical discharge. • Power sockets should be in easily accessible places so that the washing machine can be unplugged in case of any problems.
Setting up - Installation • Unpack the appliance. • Remove the 4 screws (A) from both clamps and the 4 screws (B). • Replace the 4 screws (A) and fit the trims provided (D). If your model offers this function: Position the protection sheet as shown in the diagram. 1.- Washing machine with wheel trolley. 2.- Washing machine without wheel trolley. ATTENTION: DO NOT TURN THE TAP ON • The washing machine should be connected to the water mains via the new tube supplied with the appliance (inside the drum).
If your model offers this function: • To move the washing machine easily, turn the trolley lever to the right. Once you have finished moving the machine, return the lever to its original position. • Level the machine by adjusting the front feet. a) Turn the nut clockwise to release the screw on the foot. b) Raise or lower the foot by rotating it until it stands firmly on the floor. c) Lock the foot in position by turning the nut anticlockwise until it comes up against the bottom of the washing machine.
Preparing the wash. Opening/ closing the drum ATTENTION: IT IS IMPORTANT TO MAKE SURE THAT THE DRUM IS CAREFULLY OPENED AND CLOSED, OTHERWISE THE MACHINE OR LAUNDRY COULD GET DAMAGED. ENSURE THAT THE DOORS FIT TOGETHER PERFECTLY AND ARE PROPERLY CLOSED. Loading 1. Open the washing machine lid. 2. Open the drum by pressing the white button with one hand while pressing down on the opposite door with the other. 3. Place clothes in the drum one item at a time, and without squashing.
Detergent load I Maximum pre-wash and main wash washing powder recommended II Maximum Main wash washing liquid Maximum bleach and scenting agent The detergent dispenser is divided into 4 compartments: .- Compartment I is for the pre-wash detergent. .- Compartment II is for the main wash detergent. .- The compartment is for bleach. .- The compartment is for fabric conditioners, scenting agents and special additives such as starch, blueing, etc. The detergent dispenser has two reference marks: .
Specific / special programmes SPECIAL RINSE PROGRAMME Programme runs 3 rinses with spins at 800 rpm (this speed may be reduced or spin cancelled using the appropriate button). It works for all fabrics and can be used, e.g. after garments are hand washed. SPECIAL HIGH-SPEED SPIN PROGRAMME Programme runs a spin at the speed indicated in the programme table. EMPTY ONLY Programme empties the water from the machine. HAND WASH The programme runs a complete wash cycle for garments intended to be hand washed.
General recommendations CLEANING AND MAINTENANCE OF THE MACHINE Do not use abrasives, spirits or solvents when cleaning the exterior of the washing machine. It is sufficient to use a damp cloth. The washing machine requires very little maintenance. • Drying the rubber seal of the drum. • Cleaning the dispenser and its compartments. • Cleaning the filter. • Cleaning prior to removals or when the machine is to stand idle for long periods.
CLEANING THE DETERGENT DISPENSER AND ITS COMPARTMENTS .- It is advisable to clean the four compartments of the detergent dispenser (pre-wash, wash, bleach and fabric conditioner) from time to time. To do this, remove the detergent dispenser and after cleaning it, fit it back in place. To remove and fit the detergent dispenser, follow the steps indicated in the images. A removing .- Press button A .-Hold down the button and turn the detergent dispenser outwards I II .
Troubleshooting FAULT 1.- No programme works CAUSE • The appliance is not plugged in. • The general switch is disconnected. • There is no electricity. • The fuses in the electric installation are damaged. • The door is open. • Plug it in. SOLUTION • Activate the general switch. • Check. • Check. • Close the door. 2.- The appliance does not load water • See causes for 1. • The tap is turned off. • Check. • Turn on the tap. 3.- The water does not drain • The filter is clogged.
Washing hints Hints on the most economical, most environmentally friendly way to use your washing machine. HINTS ON USING YOUR WASHING MACHINE Wait until you have a full load before using the machine: this will avoid the use of more water and power than necessary. We recommend using the full load capacity: this could save you up to 50% in power consumption. Wash a single full load rather than two light loads. WHEN IS PRE-WASHING NECESSARY? Only when washing heavily soiled clothes.
BLEACH Bleach is widely used to whiten fabrics, although in some cases it can cause irreparable damage. There are various symbols which refer to its use. • Bleach can be used. • Do not use bleach. WEEE This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
12.03.