Instruction booklet

27
Reversing the Door Swing of Your
Wine Cooler
This wine cooler has the capability of either
opening the door from the left or right side.
The unit is delivered to you with the door
opening from the left side. Should you desire
to reverse the opening direction, please follow
the instruction.
NOTE:
Before reversing the door, the power must be
shut off.
All parts removed must be saved to do the
reinstallation of the door.
① Get ready of
the product
on a flat
floor.
② Take out the
external
handle and 4
screws.
③ Use a
magnetic
cross screw
driver to fix
the external
handle on
the 4 pre-
screw holes.
④ Check and
make sure all
screws are
fixed well
① Prepare the
product and
tools
② Remove the
upper hinge cover
first
③ Remove the
screws that hold the
upper hinge (right
side) and take away
the upper hinge
④ Remove the
hole covers to the
left side.
⑤ Lift the door and
place it on a
protective place
⑥ Remove the
screws that hold
the lower hinge
⑦ Install the lower
hinge onto the left
opposite side
⑧ Refit the door
to the left hinge
and then screw
the left upper
hinge. After fixing
the hinge cover,
then complete the
reversing process.