User Manual

WASHING MACHINE EVOGT 10072D-UK

H B2 G B1 C2 A

V C1 p

A PROGRAMME SELECTOR

Use this control to select the desired wash programme. Turn the selector (it

can be turned in both directions) so that the programme is opposite the

reference indicator (p). The temperature selected will depend on the

programme. (See the Programme

Table).

B1 SPIN SPEED SELECTOR

2 DELAY START

C1 COLD WASH

2 AQUAPLUS (SENSITIVE KEY)

G DOOR LIGHT

H START/PAUSE KEY

V “DIGITAL” Display

The display’s indicator system allows you to be constantly informed about the status of

the machine

p CONTROL POSITION INDICATOR

“Gentle Touch Opening” is an innovative braking system enabling the washing machine to be loaded

safely and easily. Thanks to the two buffers at each end, the drum can be opened in 2 seconds by

lightly pressing the central key

This washing machine has a device that ensures that the drum is right-side-up and ready for loading/

unloading clothes when the selected programme is completed.

PAGE 1
WASHING MACHINE EVOGT 10072D-UK H B2 G B1 V A C2 C1 A p PROGRAMME SELECTOR Use this control to select the desired wash programme. Turn the selector (it can be turned in both directions) so that the programme is opposite the reference indicator (p). The temperature selected will depend on the programme. (See the Programme Table).
PAGE 2
Programme table mod EVOGT 10072D-UK programme COTTONS programme for aprox. time min. max. temp. setting ºC spin speed rpm/min max. load Kg.
PAGE 3
SELECTING THE DESIRED PROGRAMMES AND OPTIONS 3.- Turn the programme selector (A) to the desired programme. 4.- Press the key or keys for any options desired (C1, C2,). .- It is advisable to select the required options before pressing the Programme Start key (H). .- Remember that if the programme has already passed the stage at which an option is activated, that option will not be implemented.
PAGE 4
door light (G) Once the START/PAUSE button has been pressed the light first flashes then stops flashing and remains on until the end of the wash. 2 minutes after the end of the wash the light goes off to show that the door can now be opened. Cancel-change programs Once you have started a program, and wish to change or cancel it, you should proceed in the following manner, - Put the program selector in the OFF( ) position.