User Manual

!
EN
13
6. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
MACHINE ENROLLMENT (ON APP)
! Download the Candy simply-Fi App on
your device.
! Open the App, create the user profile
(or log-in if it is already created previously)
and enroll the appliance following the
instructions on the device display or the
"Quick Guide" attached on the machine.
TO ENABLE REMOTE CONTROL
! Check that the router is switched on and
connected to the Internet.
! Load the laundry, close the door, add the
detergent if it’s necessary.
! Turn the SMART RING (programme
selection ring) to the REMOTE CONTROL
(Wi-Fi) position: the door will lock and the
controls on the control panel will be
disabled.
! Start the cycle using the Candy simply-Fi
app. When the cycle has been completed,
turn off the machine by turning the
SMART RING to the OFF position to
unlock the door.
*
OFF
* REMOTE CONTROL (Wi-Fi)
TO DISABLE REMOTE CONTROL
! To exit REMOTE CONTROL mode while
a cycle is underway, turn the SMART
RING to any position other than REMOTE
CONTROL (Wi-Fi). The control panel on
the appliance will be operative once
again, and if the cycle is paused, you will
be able to open the door once the DOOR
LOCKED indicator light switches off.
! With the door closed, turn the knob to the
REMOTE CONTROL (Wi-Fi) position to
control the appliance using the app once
again. If there is a cycle underway, it will
continue.
The Candy simply-Fi App is available
for devices running both Android and
iOS, both for tablets and for
smartphones.
Get all the details of the Wi-Fi
functions by browsing the App in
DEMO mode.
For safety reasons, in some wash
cycle phases, the door can be
opened only if the level of the water
is below its lower edge and if the
temperature is less than 45°C. If
these conditions are met, wait for the
DOOR LOCKED light to switch off
before opening the door.