User Manual

11
Rinse with water-filling
1.Place laundry into the washing machine.
Place laundry into the washing machine. Select the appropriate current
according to the laundries.
2.Add water.
Add the appropriate amount of water.
3.Rinse
Adjust the wash timer to 5-7 minutes for the rinse cycle
Rinsing with stored water
(Repeat the mid-wash spin cycle and rinse cycle with stored water 2-3 times)
1.Place laundry into the washing machine. Select the appropriate current
according to the laundries.
2.Fill up water to the preset level.
3.Rinse
Adjust the wash timer to 2-3 minutes for rinsing.
When the laundry quantity is low, use the “SOFT” current. If you use the
“NORMAL” current, the water may splash.
The rinse cycle
Spinning
1. Distribute laundry into the spin tub evenly and smoothly.
2. Insert the gland into the tub properly.
Close the inner and outer cover of the spin tub.
3. Spin
Select an appropriate spin time according to the condition of the laundry, and start the
spinning cycle.
sound occurs, it is generally due to the laundry
being placed in a slanted fashion. Please stop the machine and re-arrange the laundry
accordingly.
pause if the outer cover of the spin tub is
opened. Close it to resume the spinning cycle.
To run spinning and draining or
rinsing with water-filling one after
the other, first run the spinning
cycle for around 1 minute, then
draining or rinsing with
water-filling. Otherwise the
spinning will stop automatically
because of the excess water in the
spin tub.