User guide

MAN 01/EN/01 CRONO S-PID 50 02/13

SECTION 6

SETTINGS LOCK

WARNINGS

The CRONO S-PID 50 pump has 2 access configurations:

- L 0 (unlocked): in this configuration you can use the

control buttons to access all of the settings and parameters

and control all of the operational functions

- L 1 (locked): in this configuration you can use the control

buttons to control the operational functions (switching on,

priming and switching off) but cannot modify any of the

settings. When the pump is set to L 1 the display shows

the lock indicator .

Before attempting to modify any of the settings, ensure

that the selected access level of the pump is L 0 (OFF

symbol).

• This access level for the functions remains in the memory even if the battery

is removed.

• When the settings access is L 1 (locked), any attempt to access the locked

options will cause the pump to beep intermittently and display the “lock”

indicator.

•

The information relating to the locking/unlocking of the settings lock is supplied

at the back of this manual on a plastic card and is only for use by a doctor.

PROG