User guide

29
MAN 01/EN/01 CRONO S-PID 50 02/13
SECTION 8
FACTORY SETTINGS
The pump is supplied with the following default settings:
Delivery time 10 h
End of infusion acoustic signal AL on (active)
Partial volume 50 ml
Access level L 0 (unlocked)
Number of infusions 0
In flow rate mode the pump is supplied with the following settings:
Flow rate 5 ml/h
End of infusion acoustic signal AL on (active)
Number of infusion sites IP,1
Partial volume 50 ml
Access level L 0 (unlocked)
Number of infusions 0