User guide

MAN 01/EN/01 CRONO S-PID 50 02/13

SECTION 9

QUICK REFERENCE

The buttons have a built-in safety delay: you must keep them pressed for

several seconds before the command takes effect.

These quick reference instructions are not an alternative to reading the

information in this manual, but give a basic and rapid summary of the pump’s

functions.

BUTTONS ACTIVATION DISPLAY

• Show all display segments

• Show the type of programming (flow rate/time)

• Access the flow rate/time selector (only possible

with L 0 access level).

• Change the flow rate/time setting

• Automatic positioning of the pusher at the start

of the infusion

• Switching off the pump

BUTTONS SETTINGS DISPLAY

•

The pump is switched off with L 0 access level

• Access the end of infusion alarm selector

• Access the number of infusion sites selector -

IP from 1 to 5 - (only in “F”mode).

• Access the partial volume selector

• Change the value of the preceding settings

PROG

press

PROG

BATTERY INSERTION

PUMP SET TO OFF

PROG