User guide

MAN 01/EN/01 CRONO S-PID 50 02/13

WITHDRAWING THE PUSHER

1. Stopping an infusion before the end

This function allows the interruption of an active infusion,

withdrawing the pusher to the start position of the infusion.

To carry out a withdrawal, proceed as follows:

• Turn off the pump by pressing the

and the buttons

simultaneously.

• Press the

and the button simultaneously: the

display shows End for 10 seconds and then begins to

withdraw the pusher.

• During the 10 seconds that the display shows End you

can cancel the withdrawal request by pressing the

and the

buttons together.

2. Withdrawal of the pusher at the end of the infusion

At the end of the infusion the display shows the End

message and the pump will emit an acoustic signal for

a few seconds.

The pusher remains stationary at the end-infusion position

for around 10 seconds, after which it begins to withdraw

until it reaches the start-infusion position.

When the withdrawal is complete, the display shows OFF

and the pump is ready for a further infusion.

Pusher in motion

While the pusher is in the process of being withdrawn,

the display shows the “pusher continuous withdrawal”

indication.

SECTION 10