User guide

MAN 01/EN/01 CRONO S-PID 50 02/13

PREPARATION OF THE RESERVOIR

1. Screw the needle into the reservoir in a clockwise direction and remove the

needle cover;

2. Fill the reservoir , aspirating the liquid slowly and checking that the quantity

of the drug does not exceed its capacity or any partial volume you may

have set;

3. Screw the Luer-Lock cap to the reservoir (a) and then unscrew the stem,

rotating it counter-clockwise (b) with a fairly rapid movement;

4. Insert the reservoir into the pump; the rubber piston will be inserted into the

pusher. Rotate it clockwise through 90° and it will click and engage with

the pusher;

5. Insert the cone of the infusion set over the reservoir.

PREPARATION OF THE RESERVOIR AND CONNECTION TO THE PUMP

SECTION 11