User guide

81
MAN 01/EN/01 CRONO S-PID 50 02/13
ELECTRO-MAGNETIC COMPATIBILITY
APPENDIX 6
Guide and declaration by the manufacturer - electro-magnetic emissions
CRONO S-PID 50 is designed to operate in the electro-magnetic environment specified
below. The customer or user of the CRONO S-PID 50 must ensure that it is operated in such
an environment.
Emission test Conformity Electromagnetic environment - guide
RF Emissions CISPR11 Group 1
CRONO S-PID 50 uses RF energy only for its
internal operation. As a consequence, its RF
emissions are very low and would thus not be
expected to cause any interference to electronic
devices in the vicinity.
RF Emissions CISPR11 Class B
CRONO S-PID 50 is designed for use in all
environments, including domestic environments
and those environments directly linked to the low
voltage mains supplying residential buildings.
IEC 61000-3-2 harmonic
emissions
N/A
IEC 61000-3-3 emissions
in the event of voltage
fluctuations or flicker
N/A
The electro-magnetic compatibility tests were performed in compliance with the
standards:
• IEC 60601-2-24:2012, Medical electrical equipment, Part 2: Particular requirements
for the safety of infusion pumps and controllers.
• IEC EN 60601-1-2 Ed. 2, Medical electrical equipment, Part 1: General requirements
for basic safety and essential performance – collateral standard: Electro-magnetic
compatibility – Requirements and tests.
Guide and declaration by the manufacturer - electro-magnetic immunity
CRONO S-PID 50 is designed to operate in the electro-magnetic environment specified
below. The customer or user of the CRONO S-PID 50 must ensure that it is operated in such
an environment.
Immunity test
IEC 60601
test level
Level of
compliance
Electromagnetic environment - guide
IEC 61000-4-2
electro-static
discharge
(ESD)
15 kV in air
8 kV on
contact
15 kV in
air 8 kV on
contact
The flooring must be of wood, concrete or
ceramic. If the floor is covered in a synthetic
material, the relative humidity must be at
least 30%.
Magnetic fields
400 A/m
50 and 60 Hz
400 A/m 50
and 60 Hz