User guide

MAN 01/EN/01 CRONO S-PID 50 02/13

INTRODUCTION

Thank you for having chosen the ambulatory infusion pump, model:

CRONO S-PID 50.

This manual has been prepared to enable you to make the best use of the

CRONO S-PID 50 pump, supplying information on the settings, safe use and

maintenance of the device.

If any of the information is not clear, or if you have any doubts or questions,

please contact the Customer Support Service of CANÈ S.p.A.

Incorrect use of the pump, or the failure to follow the instructions and warnings

provided in this manual could cause serious injury.

The instructions provided herein are exclusively with respect to the ambulatory

infusion pump, model: CRONO S-PID 50 and are intended for use by the

medical and paramedical personnel who need to set up the pump initially,

and subsequently by patients who are capable of managing their therapy

autonomously, or persons who are caring for patients.

The pump has a settings locking system (see page 24) which stops the

settings from being modified by accident. The information relating to the

locking/unlocking of the settings lock is supplied at the back of this manual on

a plastic card.

The purpose of the settings lock is to avoid accidental or unauthorised

modification of the selected parameters. If it is considered inappropriate that

the patient should be aware of how to unlock the settings lock, the doctor and/

or other person who is assisting the patient should not supply this information.

The instructions in this manual are essential for the safe and correct use of

the pump. You are advised to read the whole manual before starting to use

the device and to keep the manual handy for future reference.

The pump does not need to be installed, tested and/or activated.

CANÈ S.p.A. reserves the right to modify the hardware and software

specifications described in this manual at any time and without notice.

SECTION 2