User guide

MAN 01/EN/03 CRONO PAR 50 06/13

Auto

Assigning the 4 ows over the daily 24-hour period

Press the

button again to display and set the assignment

of the 4 ows over the daily 24-hour period (of which one

is the xed F0 ow, with a rate of 0.00 ml/h). Press the

button to scroll the hours (the two digits left of the drop icon)

and the

button to select the different ows (second digit

to the right of the drop icon).

Setting the partial volume

Press the

button again to display and set the partial

volume. The partial volume can be set only if the pusher

is at the infusion start position and the pump is set to

OFF.

• If the settings lock is on (set to L1 with the display showing the lock icon

and you press the

button, the device only allows to modify the hours and

minutes but not the other parameters, which can, however, be displayed in

sequence by pressing the

button (see page 78).

• If the

button is pressed when the time is displayed the pump passes

directly to the bolus dose setting.

• Do not press any button for 20 seconds, and the setting phase will end. The

ashing displayed value becomes xed and then the OFF or StoP indication

is displayed.

NOTES

SECTION 14

PROG