User guide

MAN 01/EN/03 CRONO PAR 50 06/13

Auto

The bolus dose delivery can be interrupted at any time by pressing the

button.

If the bolus dose volume is set to 0.00 ml, pressing the

button will display the Er,d error message.

The administration of bolus doses is limited by the interval

between doses (temporal limitation).

By setting no,Lt you can disable this limitation.

Bolus doses cannot be administered during the interval

period observed by the function.

During the limitation period, if you request a bolus dose,

the display shows Er,t (temporal limitation between active

bolus doses).

SECTION 14

NOTE

ml/h

RESTRICTIONS ON THE ADMINISTRATION OF BOLUS DOSES

DISPLAYING THE NUMBER OF ADMINISTERED BOLUS DOSES

DURING AN INFUSION AND THE NUMBER OF INFUSIONS

1 - To check the number of bolus doses administered by the

patient during an infusion while the pump is OFF or StoP,

press and hold the

button for a few seconds and the

value will be displayed (nd = number of doses).

2 - To check the number of infusions delivered by the device

(PC = partial counter) while it is OFF or StoP, press and

hold the

button for about 8 seconds.

If all the hourly ows are set to F0, the display shows F0,00

with a ashing F. Pressing the

button temporarily displays

F0 with 0.00 ml/h.

ml/h