User guide

84
MAN 01/EN/03 CRONO PAR 50 06/13
The images refer to the Neria
TM
infusion set
from Unomedical, a Convatec Company.
Disinfect the infusion site following the
instructions of the relevant medical personnel.
Ensure that the area of the infusion site is dry
before inserting the subcutaneous needle.
Connect the infusion set to the reservoir.
Hold the infusion set by the wings. Prime the
infusion line manually or use the priming fun-
ction of the pump (Auto). Ensure there are
no air bubbles in the infusion line.
When you are priming the infusion line and
are preparing to insert the needle below the
skin, hold the set with the needle pointing
downwards to ensure that none of the drugs
can come into contact with the protecting
adhesive paper.
Remove the protective adhesive paper.
WARNING
SECTION 15