User guide

SECTION 8

PROGRAMMING

MAN 01/06/USA/p CRONO FIVE 11.10

For programming, the pump must be:

• In OFF condition.

• With key-pad lock-out in L0.

Depress the button for about 1 second to access the pump program -

ming sequence. The first programming option displayed on the screen is

flow rate. The flow rate can be changed with the button or the but-

ton as long as the presently programmed flow rate is flashing.

The second depressing of the button will display the second program-

ming option bolus dose volume. The bolus dose volume can be changed

with the button or the button as long as the presently program -

med bolus dose volume is flashing.

The third depressing of the button will display the third programming

option minimum time interval between bolus doses. The minimum time

interval between bolus doses can be changed with the button or the

button as long as the presently programmed interval time is flashing.

The fourth depressing of the button will display the fourth program -

ming option number of bolus doses per hour . The number of bolus

doses per hour can be changed with the button or the button as

long as the presently programmed number of bolus doses per hour is flas-

hing.

The fifth depressing of the button will display the fifth programming

option partial volume. The partial volume can be changed with the

button or the button as long as the presently programmed partial volu-

me is flashing. The partial volume can only be programmed when the pus-

her is in the start position.

NOTE

If the key pad lock-out is programmed to L1, depressing the button will

display L1 (key pad lock-out: programming is not allowed).