User guide

SECTION
8
42
PROGRAMMING OF BOLUS DOSES PER HOUR
MAN 01/06/USA/p CRONO FIVE 11.10
10
20
10
20
The number of bolus doses per hour can be
programmed between 1 and 12 boluses per
hour.
This function limits the patient to access more
boluses per hour than programmed.
The number of bolus doses per hour is acces-
sed by the fourth depressing of the but-
ton in the pump programming sequence (see
page 37).
Programming procedure:
1. When the button is depressed for a
fourth time, an "n" is displayed and the
presently programmed number of bolus
doses per hour is flashing.
2. By depressing the button the value will
increase; by depressing the button the
value will decrease. Any change in value
is followed by an acoustic signal.
3. If no button is depressed within 8 seconds
in the programming phase, the number of
bolus doses per hour stops flashing and
OFF appears on the screen.
4. Depressing the button before the OFF
message appears (the number of bolus
doses per hour is still flashing) moves the
programming sequence to the next option:
partial volume.
NOTE
• Programmed bolus doses per hour is
automatically stored.
• By depressing the button when the dis-