User guide

SECTION 10
58
DISPLAYING PROGRAMMED PARAMETERS
MAN 01/06/USA/p CRONO FIVE 11.10
10
20
10
20
To display programmed parameters/values
the pump must be running ( ON). The screen
will show either remaining delivery time or
F0,00 if the flow rate is programmed to 0.
Display procedure:
1.Depress the button for about 1 second
and the programmed flow rate will be dis-
played
2. If no button is depressed for 5 seconds, the
pump will revert to remaining delivery time
or F0,00.
3. If the button is depressed again within
the 5 seconds time interval, the next value
of the programming phase will be displayed
and so on. The sequence is as follows:
bolus dose, minimum interval between
bolus doses, number of bolus doses per
hour, partial volume, clinician bolus.
NOTE
The lock level of the key pad does not interfere
with displying programmed parameters.
The chart beside explains the sequence of
screens related to the display of the parame -
ters.