User guide

SECTION 11
66
BATTERY INSTALLATION OR REPLACEMENT
MAN 01/06/USA/p CRONO FIVE 11.10
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
10
20
Use only lithium 3 Volt 123 A batteries.
Make sure the pump is in OFF condition (OFF
will be displayed), then replace the battery.
Battery exchange procedure:
1. Open the battery compartment using the
blue key-ring device that is included with
the pump.
2. Pull out the cover.
3. Use the small ribbon strap (which lies under
the battery) to facilitate the removal of the
battery.
4. Remove the discharged battery and discard
it properly.
5. Wait for 10 seconds, then insert the new
battery checking that it is placed in the cor-
rect position as to polarity indicator and that
the ribbon strap is under the battery.
6. Close the cover after the battery has been
installed.
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID
CRONO PID