Manual

CANNON
®
miniAV-X Automatic Viscometer with VISCPRO
®
Instruction & Operation Manual
Version 1.Ob— March, 2012; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
4
AC Mains power cord must be attached to the connector labelled
~MAINS. This connection serves as a means of disconnect and should be
readily accessible.
The (O) symbol indicates the OFF position for the electrical switches for
your unit (AC Mains or accessories).
Hazardous materials
Routine miniAV-X operation may require the use and handling of hazard-
ous chemicals and solutions. CANNON
®
Instrument Company strongly
urges the operators and technicians working with the miniAV-X to take
proper safety precautions when working with these materials. These
safety procedures can be found in the Material Safety Data Sheets which
accompany the solutions.
Specifications
ecnailpmoC/snoitacificepSVAinim
lacirtcelE&#traP zH06/05,CAstlov511:58A-5279#ledoMX-VAinim
zH06/05,CAstlov032:68A-5279#ledoMX-VAinim
zH0
6/05,CAstlov001:78A-5279#ledoMX-VAinim
snoisnemiDX-VAinim )"7.02x2.71x01(hgihmm625xpeedmm734xediwmm452
snoisnemiDylppuSrewoP )"8.6x6.51x31(hgihmm271xpeedmm693xediwmm033
thgieW
)
sbl31(gk6:revieceRetsaW;)sbl42(gk11:ylppuSrewoP;)sbl04(gk81:tinuhtabX-VAinim
thgieWgnippihS seirossecca/stinullahtiw)sbl521(gk75
snoitidnoCgnitarepO 2eergednoitulloP,IIyrogetaCnoitallatsnI,gnisnednoc-nonHR%09-%01,C°03-°51
gnitaResuF "4/1x4/1-1,A4V052M:tinUV032;"4/1x4/1-1,A8V052M:stinUV001&V511
ecnailpmoC 0091(TOP-IH;)CEE/32/37(evitceridegatlovwoL;)CEE/633/98(evitceridCME:kraMEC
).ces06,CDV
Installation
miniAV-X setup can be accomplished in just a few minutes by following
the instructions below. Use the diagram on the facing page to assist with
the setup. Fill the miniAV-X bath per the instructions in Chapter 5.
Required installation components
 User-supplied solvent container w/ G38 threads for lid
 CANNON
®
-supplied Nalgene
®
waste bottle with lid
 Waste Receiver Assembly
 Blue transparent Vacuum line (6 mm FEP)
 Pressure and Solvent lines (1/8” FEP)
1
2
3
4
5
Supply OFF Symbol
( O )