Manual

105
CANNON
®
miniAV-X Automatic Viscometer with VISCPRO
®
Instruction & Operation Manual
Version 1.0b— March, 2012; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
The Port Output Format window
NOTE
If you select NEW FILE for output, click the button to open the
Windows Save As: box. Select the desired directory and type the desired file
name in the File Name: text box. If you select an existing file, ASCII port analysis
data will be appended to the file.
Make certain that you have selected the desired port for configuration by clicking
on the port name in the Add Port list box prior to selecting output data and
formatting options for that port. OUTPUT FOR EACH ADDED PORT MUST BE
CONFIGURED SEPARATELY (see note below).
Configuring output
d. Select the desired port/file for configuration by clicking the name
of the port/file in the port list box. Then click the radio button
corresponding to the desired locale format (U.S. or local). Your
choice will determine the formatting of numeric data, dates and
choice of decimals or commas as placeholders.
Delaying serial output
e. You may delay data transmission of serial output for a time
parameter you specify by clicking the Delay button to insert the
delay code into the Configure list box, Header or Footer. The
Delay Configuration window will appear. To set the time of the
Delay, type a numeric value in the appropriate field, and click on
one of the radio buttons to select the correct unit of time. Then
click OK.
Selecting output data