Manual

CANNON
®
miniAV-X Automatic Viscometer with VISCPRO
®
Instruction & Operation Manual
Version 1.Ob— March, 2012; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
122
Choosing the Error Log analysis
4. Click on the Define and Open New Configuration radio button
(or verify that the option is selected).
NOTE
If you have already configured and saved an analysis, its name will
appear in the list box on the right side of the window. If you click on an
existing configuration and click OK, the analysis will be performed using
the selected configuration settings. It will not be necessary to complete
the remaining steps in this procedure.
5. Click OK. The Error Log Configuration window will appear.
The Error Log Configuration window consists of tabbed pages with
filter options.
 Date Filter—allows you to select date/time parameters for the
analysis
 Sample Filter—allows you to select which tubes/technicians/tests
will be included in the analysis.
 Error Filter—allows you to select what sample data will appear in
the Error Log Table and how the data will be displayed
6. Click on the tab corresponding to the filter you wish to set and
complete configuration options. Use the check boxes to select which
fields to include in the report. After individual options have been
selected, use the related spin controls and radio buttons to determine
the appearance of data.
7. When you have completed the configuration, click OK. The program
will prompt you to save the configuration.