Manual

83
CANNON
®
miniAV-X Automatic Viscometer with VISCPRO
®
Instruction & Operation Manual
Version 1.0b— March, 2012; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
miniAV-X repair/replacement components
The parts included in the list below are the more common repair/replace-
ment components for the miniAV-X.
When making repairs using these items, make certain to replace obsolete
or worn components with matching components.
Installation kit
The installation kit contains all parts required for assembly/installation of
the miniAV-X. Kit replacements may be purchased from CANNON
®
(part #P81.2229).
The installation kit contains the following components:
DC Power Cable • AC Power Cord • (12’) 1/8” solvent tubing • (2)
solvent filters • (2) bottle caps • (6’) VAC waste line (6 mm) • (2’) 1/8”
air line • 6 mm tubing for waste b union • RS-232 cable • 9(F)-24(M)
cable adapter • bath fluid • 30 sample vials • selected viscosity standards
• Bath Fill Cap Assembly • 3”-4” vent coupling adapter • tubing cutter
Spare parts kit
The spare parts kit contains a variety of tools used to accomplish minor
service and replacement procedures. Refer to your packing list for a
description of kit components. Kit replacements may be purchased from
CANNON
®
(part #P81.2230).
The spare parts kit contains the following components:
(4) fuses (8A for 115V, 4A for 230V unit • (2) 6mm SMC fittings • drive
belt • 3/16” hex key for drain • (2’) drain tubing • 7/54 Hex key for
elevate sensor