Manual

CANNON

miniAV

-X Automatic Viscometer with VISCPRO

Instruction & Operation Manual

Version 1.0— February, 2008; CANNON

Instrument Company

2139 High Tech Road • State College, PA 16803 • USA

Saving a current analysis

To save a current analysis configuration:

1. Select Analyses from the VISCPRO

primary menu options.

2. Select Save Analysis from the Analyses menu options.

3. Select the desired analysis. The Save Configuration window will

appear. Type the name of the new configuration in the Save As:

field. Or double-click the name of a preexisting configuration in the

Existing Configurations list box to replace the existing configuration

with the new configuration settings.

4. Click OK.

NOTE

You may click Cancel from the Save Configuration window to exit without

saving configuration changes.

Deleting an analysis configuration

You can delete an existing analysis configuration from the Choose

Analysis window by highlighting the desired configuration in the list

box and clicking the Delete button or pressing the D key. The

configuration will be immediately and permanently deleted.

Printing an analysis

To print the complete analysis, select Print from the VISCPRO

Main

menu while the analysis is being displayed. If multiple VISCPRO

windows are open, click the analysis window for the analysis you want to

print to make it the active window before you select Print. Then choose

print options from the Windows

Print window and click OK to print the

analysis. (Consult your Windows

manual and printer/print driver

documentation for more information on print settings).

It is also possible to select individual or multiple samples from an

analysis for printing (see next section).

NOTES

The font size for printed analyses will be automatically adjusted to fit data

columns to the selected printer paper size. If the font is too small, or if

columns of data are missing or truncated, try using print options to set

your printer to print in landscape instead of portrait orientation.

The Print option from Main will not be accessible unless the analysis

window is the active window.