Setting Up Your MX360 or MX410 In Default Mode (Tel Priority Mode) Without An Answering Machine Next
Connecting The Phone Lines Previous Next
Fax to Phone Line Connection Before Hand Set (Phone) Wall Jack (Existing Phone Cord) After Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 3
Fax to Phone Line Connection • Plug the provided phone cord into the wall jack Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 4
Fax to Phone Line Connection • Plug the provided phone cord into the “L” jack located on the rear of the multifunction Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 5
Fax to Phone Line Connection • Remove the white plug (D) from the upper jack.
Fax to Phone Line Connection • Plug the second phone cord into the “telephone” jack located on the rear of the multifunction Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 7
Fax to Phone Line Connection • Plug the second phone cord into the phone Hand Set (Phone) Wall Jack (Existing Phone Cord) (Phone Cord included with Canon printer) Previous Next 8
Setting Up The Receive Mode Previous Next
Step 1 Step 2 Turn on the MX360 or MX410 by pressing the ON button. Press the FAX button.
Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”.
Step 5 Step 6 Press the OK button The “Receive mode set” screen will appear Previous Next 12
Step 7 Step 8 Use the Left or Right arrow button to select “TEL priority mode” Ensure that “TEL priority mode” is displayed Previous Next 13
Step 9 Step 10 Press the OK button The “Make advanced settings?” screen will appear Previous Next 14
Step 11 Step 12 Use the Left or Right arrow button to select “Yes” Ensure “Yes” is selected Previous Next 15
Step 13 Step 14 Press the OK button The “TEL priority mode screen will appear Previous Next 16
Step 15 Step 16 Use the Left or Right arrow button to select “User-friendly RX” Confirm “User-friendly RX” is selected Previous Next 17
Step 17 Step 18 Press the OK button The “User-friendly RX” screen will appear Previous Next 18
Step 19 Step 20 Use the Left or Right arrow button to select “ON” Ensure “ON” is selected Previous Next 19
Step 21 Step 22 Press the OK button The screen will return to the fax standby screen.
Receiving A Fax To receive a fax: • Pick up the handset on the phone connected to the MX360 or MX410. • Listen for fax tones. • When the tones stop hang up the handset. • The MX360 or MX410 will receive the fax document. IMPORTANT: In order to receive a fax, you must pick up the handset on a phone that is connected to the multifunction.