Installation guide

INFO Key

Press the INFO key while in any navigation view

to display information about objects that are

nearest to an active cursor.

NOTE: You can use the INFO key to obtain extra information about specific

Navionics

icons.

NOTE: Your control head will have one of the keys shown here. Both keys

function in the same way.

Chart Info menu:

If the cursor is not active, pressing the INFO key

will highlight the Chart Info menu. Use the 4-WAY

Cursor Control key to highlight Nearest Port,

Nearest Tide Station or Nearest Current Station,

then use the RIGHT Cursor key to display the

requested information.

Port Info menu:

If the cursor is active, pressing the INFO key will

display the Port Info menu. From the Chart Info menu,

if you choose Nearest Port using the 4-WAY Cursor

Control keys, the Port Info menu will also be

displayed. Use the 4-WAY Cursor Control key to

highlight Port Information, Pilot Book or Panoramic

Photo (some of these may not be present, depending on what is actually available

for the map at this location), then use the RIGHT Cursor key to display the

requested information.

NOTE: Not all menu choices will be displayed, as they are dependent on what

information is available from your MMC/SD card at that point in the map.

NOTE: The built-in UniMap

™

does not contain Port, Tide or Current information.

This information is only available from optional purchase MMC/SD cards.

NOTE: If a Chart Information text box appears instead of one of the Info menus,

this means that there is no additional pilot book or panoramic photo information

available near your cursor's location.

GOTO Key

The GOTO key has additional Platinum

™

Cartography

functionality in the pilot book, where it is used to move from

screen to screen in the pilot book hierarchy. See the

Chart/Pilot Book View

section for more information.