THANK YOU FOR PURCHASING A CANNONDALE Congratulations on your purchase of a Cannondale IQ Series Cyclocomputer. At Cannondale, we strive to produce products and accessories that contribute to your enjoyment of cycling. While Cannondale has grown over the years, we remain a small company at heart. Our passion for performance, innovation, quality and service continue to drive our efforts. We thank you for sharing that passion, and for choosing Cannondale. We’ll see you out there.
TABLE OF CONTENTS COMPONENTS OF THE CYCLOCOMPUTER COMPONENTS OF THE CYCLOCOMPUTER 1 WARNINGS & CAUTIONS 2 REPLACING THE BATTERY 3 INSTALLING THE IQ108 CYCLOCOMPUTER ON YOUR BIKE 6-7 INSTALLING THE IQ114 CYCLOCOMPUTER ON YOUR BIKE 8-11 KEYS & THEIR FUNCTIONS SHIPPING MODE, SLEEP MODE & RESET ALL PROGRAMMING THE CYCLOCOMPUTER OPERATING THE CYCLOCOMPUTER (IQ108) OPERATING THE CYCLOCOMPUTER (IQ114) 12 1 2 2 3 5 6 13 14-19 3 21-27 28 SPECIFICATIONS & RANGES 29 WARRANTY & CONTACT 30 8 CYC
WARNINGS & CAUTIONS WARNING: Failure to pay attention to the road, trail, traffic or your surroundings could result in an accident, with risk of serious injury, paralysis or death. You must focus on riding, not your computer. Learn computer operations, and do all possible computer operations when not riding. For any operations you choose to perform while riding, choose a time and place where this distraction has less risk.
INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE - IQ108 MOUNTING THE WIRED SPEED SENSOR (IQ108 only ) The wired speed sensor is best installed starting with the fork sensor unit and then working up toward the handlebar or stem bracket. INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE - IQ108 1 CAUTION: Make sure to leave enough slack in the wire to allow for the motion of the bike steering system and the suspension fork if you have one.
INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE - IQ114 MOUNTING THE WIRED CADENCE SENSOR (IQ114 only ) On the Cannondale IQ114, speed is picked up from the front wheel and cadence is picked up from the crank arm. INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE - IQ114 4. Route the sensor wire forward and under the bottom bracket and along the bottom of 1 The wired cadence sensor is best installed starting with the cadence sensor unit and then working up toward the handlebar or stem bracket. 1.
INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE - IQ114 MOUNTING THE WIRED SPEED SENSOR The wired speed sensor is best installed starting with the fork sensor unit and then working up toward the handlebar or stem bracket. INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE - IQ114 2 CAUTION: Make sure to leave enough slack in the wire to allow for the motion of the bike steering system and the suspension fork if you have one.
KEYS & THEIR FUNCTIONS SHIPPING MODE, SLEEP MODE & RESET ALL SHIPPING & SLEEP MODES SHIPPING MODE: Your IQ Series Cyclocomputer is comes to your Cannondale dealer in SHIPPING mode. In this mode, the unit is set to its factory default settings. The center display line flashes ENGLISH (default language choice). Press either key to enter the Setting Sequence.
PROGRAMMING THE CYCLOCOMPUTER PROGRAMMING THE CYCLOCOMPUTER THE SETTING SEQUENCE In the Setting Sequence, the variable being adjusted will flash in the display. Press the FUNCTION key to adjust and Press the SET key to set the value and advance to the next variable. SETTING UNITS (MILES OR KILOMETERS) Set Units & advance to Set Wheel Size: PRESS SET SELECTING LANGUAGE Your IQ Series Cyclocomputer has 5 language choices: English, German, French, Italian and Spanish.
PROGRAMMING THE CYCLOCOMPUTER PROGRAMMING THE CYCLOCOMPUTER PROGRAMMING WHEEL SIZE (CONTINUED) MANUALLY SETTING WHEEL SIZE Continue through all fields ADJUST: PRESS FUNCTION SET & ADVANCE: PRESS SET POPULAR WHEEL SIZES The charts at left show the measurement conversion for many popular wheel sizes.
PROGRAMMING THE CYCLOCOMPUTER PROGRAMMING THE CYCLOCOMPUTER SETTING THE ODOMETER Cannondale IQ Series Cyclocomputers allow you to manually program your odometer. This is useful for preserving distance totals in the event of battery failure or if you need to restet the computer for any reason. SETTING TIME OF DAY Cannondale IQ Series Cyclocomputers display Time of Day in 1-second resolution in 12 or 24-hour formats.
OPERATING THE CYCLOCOMPUTER OPERATING THE CYCLOCOMPUTER IQ108: The IQ108 has 6 modes of operation. SCROLL THROUGH MODES by PRESSING the FUNCTION key. To RESET CURRENT INFORMATION (Ride Time, Trip Distance, Average & Max Speed), PRESS & HOLD the SET key in any mode IQ114: The IQ114 has 8 modes of operation. SCROLL THROUGH MODES by PRESSING the FUNCTION key. ACCESS SUB MODES by PRESSING the SET key. ACCESS SETTING MODES by PRESSING & HOLDING the SET key. but Clock or Odometer.
OPERATING THE CYCLOCOMPUTER OPERATING THE CYCLOCOMPUTER TIME OF DAY > REPAIR SUB MODE (IQ114 ONLY) The IQ114 allows you to program a service alert for scheduling bike maintainence. In Time mode, PRESS the SET key to TOGGLE BETWEEN REPAIR MODE AND CLOCK. PRESS & HOLD the SET key to ACCESS THE SETTING SEQUENCE for Clock or Repair alert. OPERATING THE STOPWATCH (IQ114 ONLY) The IQ114 is equipped with a 100-hour stopwatch with 1-second resolution. In Stopwatch mode, PRESS the SET key TO STOP OR START TIMING.
OPERATING THE CYCLOCOMPUTER OPERATING THE CYCLOCOMPUTER RESET CURRENT INFORMATION > TRIP DISTANCE, RIDE TIME, AVERAGE SPEED & MAX SPEED MODES (IQ114 ONLY) To CLEAR ALL CURRENT INFORMATION, PRESS & HOLD the SET key in Trip Distance, Ride Time, Average Speed or Max Speed modes. ODOMETER > TRIP DOWN/TRIP UP SUB MODE (IQ114 ONLY) The IQ114 is equipped with separate Odometer sub mode that allows you to preset a specific distance and gives the option of counting down the selected distance.
OPERATING THE CYCLOCOMPUTER OPERATING THE CYCLOCOMPUTER CADENCE MODE (IQ114 ONLY) OPERATING THE BACKLIGHT IQ Series Cyclocomputers are equipped with a Back Light system for viewing information in low light conditions. To ACTIVATE THE BACK LIGHT, PRESS & HOLD the FUNCTION key in any operating mode. SCROLL THROUGH CADENCE SUB MODES, PRESS the SET key. To CLEAR ALL CURRENT INFORMATION, PRESS & HOLD the SET key. NOTE: Excessive use of the Back Light will reduce battery life.
TROUBLE SHOOTING • • • • DECREASED CONTRAST IN DISPLAY SCREEN: Battery is weak and must be replaced. DISPLAY IS BLANK: Change the battery or reset the computer. DISPLAY SHOWS PARTIAL DIGITS: Reset the computer. SPEED/DISTANCE NOT RECORDING: Check sensor/magnet alignment. Make sure that the sensor is no more than 3mm from the magnet. • ENTIRE SCREEN IS DARK: Unit may have been over exposed to direct sunlight. Move the bike to the shade. The data will be OK.
WARRANTY & CONTACT ������������ WARRANTY: All Cannondale bicycle accessories are fully guaranteed to the original owner against defects in materials and/or workmanship for the life of the product. The product warranty is not valid if a product fails because of accidents, misuse, normal wear and tear or improper care. 30 cannondale usa 172 Friendship Road Bedford, Pennsylvania 15522 (Voice): 1-800-BIKEUSA (Fax): 814-623-6173 custserv@cannondale.com www.cannondale.
