Operation Manual
english / deutsch / español / italiano / francais
16
17
PROGRAMMING THE CYCLOCOMPUTER
MANUALLY SETTING WHEEL SIZE
If your wheel/tire size is not one of the sizes listed in the chart on the previous page, or if you desire absolute accuracy,
you may enter an exact wheel circumference into the system.
1.
On a flat open surface make a mark on your tire and the floor exactly where they meet.
2.
Roll your bike forward one full revolution of the wheel and mark the point on the floor where the revolution is
complete.
3.
Measure the distance from the first mark to the second in millimeters and enter the resulting number into your
computer using the following steps:
PROGRAMMING THE CYCLOCOMPUTER
POPULAR WHEEL SIZES
The charts at left show the
measurement conversion for
many popular wheel sizes.
wheel size circumference
26 X 1.0 1973
26 X 1.5 2026
26 X 1.6 2051
26 X 2 2114
700 X 20C 2114
700 X 23C 2133
ADJUST:
PRESS FUNCTION
Continue through
all fields
SET & ADVANCE:
PRESS SET
ADJUST:
PRESS FUNCTION
Set Wheel Size &
advance to Set
Odometer: PRESS SET
wheel size circumference
700 X 25C 2146
700 X 28C 2149
700 X 32C 2174
700 X 35C 2205
700 X 40C 2224
PROGRAMMING WHEEL SIZE (CONTINUED)