Model 1030E Standalone Enclosure User Manual
NOTICE! This device contains static sensitive components. It should be handled only with proper Electrostatic Discharge (ESD) grounding procedures. NOTE! Cet équipement contient des composants sensibles aux décharges électro-statiques. Il doit absolument être manipulé en respectant les règles de mise à la terre afin de prévenir de telles décharges.
Model 1030E Standalone Enclosure User Manual The Model 1030E standalone enclosure shown in Figure 1 supports one 2U-sized module. Figure 1. Model 1030E Standalone Enclosure The front provides a slot for one module. The back includes an AC power cord socket. The AC power supply provides +5 VDC to the module. Installing and Using the 1030E Enclosure 1. Place it on a secure surface with room for air flow and within reach of the AC power source. 2.
Regulatory Compliance • • • • • • • • • 4 ETL, cETL (UL 60950 CAN/CSA C22.2 No.
Limited Lifetime Warranty Effective July 1, 2005 and After, Canoga Perkins warrants that, at the time of sale, and, for its lifetime, with certain exceptions noted below, every Canoga Perkins' labeled product purchased will be free from defects in material and workmanship for its lifetime, if properly installed and used in conformity to Canoga Perkins' published specifications. This warranty covers the original user only and is not transferable.
Limitations Canoga Perkins may at its sole discretion modify its Limited Warranty at any time and from time to time. Other than those expressly stated herein, THERE ARE NO OTHER WARRANTIES OF ANY KIND, EXPRESSED OR IMPLIED, AND SPECIFICALLY EXCLUDED BUT NOT BY WAY OF LIMITATION, ARE THE IMPLIED WARRANTIES FOR FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.
