Manual

Canoga Perkins 9101 LAN Chassis

Step 5: Reinsertion of the power supply cable will be more difficult than it's

removal. Look inside the chassis prior to insertion and calculate the

proper orientation of the plug, then reinsert it. Realign the P/S in it's guide.

If you experience resistance, adjust the supply slightly until it can be

easily placed within it's guides. Once the P/S is in place, secure it to the

chassis. Reapply the power cord and set the power switch to the ON

position (if you replaced a DC supply). Reference Figure 4-5.

Figure 4-5

Replace Power Supply - Step 5