Manual

7
Close the Top Cover.
8 Press the OK button.
The paper is now advanced.
9 Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and
the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") ➔User's Guide
ManageR-
emainRoll
Barcodes Printer Operation After the Paper is Fed
Off Printed A menu for selection of the type of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Not prin-
ted
On Printed The type and amount of paper left is automatically detected based on the barcode printed on the
roll.
There is no need to specify the type and length of the paper.
Not prin-
ted
A menu for selection of the type and length of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
Important
• Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Speci-
fying the Cutting Method for Rolls.") ➔User's Guide
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Ref-
erence Guide.") ➔User's Guide
• Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing qual-
ity. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.92
Loading rolls in the Roll 2 (Lower) holder
Caution
•
Do not detach the Roll Unit in the following cases.
• During printing
Vibration from removing the Roll Unit may affect the printing quality.
• If a sheet is loaded in the printer
The sheet may be ejected, and (rarely) it may be bent.
1
Press the Load button.
Loading Rolls in the Printer iPF840 Series
Basic Guide
Handling Paper Handling rolls
18