Manual

ManualsBrandsCanon ManualsComputersimagePROGRAF iPF840 Large Format Printer

Printer Relocation

Preparing to Transfer the Printer

Preparing to Transfer the Printer ...................................................................................................................... 73

Reinstalling the Printer ..................................................................................................................................... 79

Preparing to Transfer the Printer

To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.

Refer to the Setup Guide for details on packing the printer and installing it after transfer.

Important

•

Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage

the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.

Note

•

Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer

(that is, when you execute the printer menu item to prepare for transfer).

•

Ink must be drawn into the Maintenance Cartridge before Level 2 or Level 3 printer transfer, as described in the

following table. Prepare the Maintenance Cartridge in advance.

•

Always follow the instructions of the service representative when transferring the printer under Level 3 conditions.

Level

Transport and

Storage In

Low Temper-

ature Envi-

ronments

Permitted Angle of Inclination

Amount of Ink to

Dispose of

Required

Maintenance

Cartridg-

es(*1)

Usage Examples

1 No Lengthwise: 0–30º

Rotation: 0–10º

0(*2) Moving Within a Room

and Storage In Room

Temperature Environ-

ments

2 Yes All directions: 0–30º Approx. 700

ml (20.3 fl oz)

1 or 2 Transport By Vehicle

3 Yes Lengthwise: 0–90º

Rotation: 0–30º

Approx. 700

ml (20.3 fl oz)

1 or 2 Move by temporarily

standing vertically

*1:This is the number of new Maintenance Cartridges required when you execute the Prep.MovePrinter

menu. The number varies depending on the amount remaining in the Maintenance Cartridge being used.

*2:If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, the

Maintenance Cartridge needs to be replaced.

Remove paper

Disassemble and repackage the Wheeled Output Stacker by following the installation procedure in reverse.

iPF840 Series

Preparing to Transfer the Printer

Basic Guide

Printer Relocation Preparing to Transfer the Printer