User Manual- for Camera

146
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
4
Choose [ ].
z Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [ ], and then
press the [ ] button.
5
Choose [Authenticate].
z Press the [ ][ ] buttons or turn the [ ]
dial to choose [Authenticate], and then
press the [ ] button.
6
Establish a connection with an
access point.
z Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (
=
142) or in steps 2 – 4
in “Connecting to Listed Access Points”
(
=
144).
z Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
z Keep this screen displayed until you are
nished with step 7.
7
Enter the authentication code.
z On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
z A six-digit conrmation number is
displayed.
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON
iMAGE GATEWAY as a destination Web service on the camera.
1
Log in to CANON iMAGE GATEWAY
and access the camera link settings
page.
z From a computer or smartphone, access
http://www.canon.com/cig/ to visit
CANON iMAGE GATEWAY.
z Once the login screen is displayed,
enter your user name and password
to log in. If you do not have a CANON
iMAGE GATEWAY account, follow
the instructions to complete member
registration (free of charge).
2
Choose the type of camera.
z On this camera model, [ ] is displayed
in the Wi-Fi menu.
z Once you choose [
], a page is
displayed for entering the authentication
code. On this page in step 7, you will
enter the authentication code displayed
on the camera after steps 3 – 6.
3
Access the Wi-Fi menu.
z Press the [ ] button to turn the camera
on.
z Press the [
] button.
z If the [Device Nickname] screen is
displayed, press the [
][ ] buttons or
turn the [ ] dial to choose [OK], and then
press the [ ] button.