User Manual- for Camera

94
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Tv, Av, M, C1, and C2 Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Adjusting the Flash Exposure Compensation
Still Images
Movies
Just as with regular exposure compensation (
=
79), you can adjust the
ash exposure from –2 to +2 stops, in 1/3-stop increments.
z Raise the ash, press the [
] button and
immediately turn the [ ] dial to choose
the compensation level, and then press
the [ ] button.
z The correction level you specied is now
displayed.
When there is a risk of overexposure, the camera automatically
adjusts the shutter speed or aperture value for ash shots to
reduce washed-out highlights and shoot at optimal exposure.
However, you can deactivate automatic adjustment of the shutter
speed and aperture value by accessing MENU (
=
31) and
choosing [
5] tab ► [Flash Control] ► [Safety FE] ► [Off].
You can also congure the ash exposure compensation by
accessing MENU (
=
31) and choosing [ 5] tab ► [Flash
Control] ► [Flash Exp. Comp].
You can also access the [Built-in Flash Settings] screen (
=
31)
as follows (except when an optional external ash is mounted).
- Press and hold the [
] button for at least one second.
- When the ash is up, press the [
] button and immediately
press the [
] button.
You can also access the [Built-in Flash Settings] screen (
=
31)
by pressing the [
] button and touching [ ].
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of ash range.
In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (
=
56).
In [
] mode, even after the ash res, ensure that the main
subject does not move until the shutter sound is nished playing.
Off
For shooting without the ash.
If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Adjustment is also possible by pressing the [ ] button, touching
the desired option, and then touching it again.